Loading ...
Loading ...
Loading ...
10
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, plug the
charger adapter into an appropriate AC power outlet.
Connect the charger plug into the charge socket of the
battery to start charging (Fig. 2).
3. The battery will take approximately 1 hr 20 min to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery
mWARNING! This charger does not automatically turn
owhenthebatteryisfullycharged.Please take care not
to leave the battery plugged into the charger.
Switchoorunplugthechargeratthemainswhen
charging is complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
1. Flip up the stopper plug and attach the quick-connect end
of the hose to the water outlet/hose connection (Fig. 3).
To connect, pull back the connector collar and align the
connector with the water outlet, and release the collar.
You will feel a click when it snaps in.
NOTE: The unit is equipped with a stopper plug to
prevent leaking when the hose is not connected, or during
transport. Be sure to insert the stopper plug completely to
ensure a secure, leak-proof connection.
2. Connect the other end of the hose to the spray gun
(Fig. 4). To connect, pull back the connector collar,
align with the end of the spray gun, and release the collar.
You will feel a click when it snaps in.
NOTE: To disconnect the hose, pull back the collar and
pull the hose away from the connector.
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
Operation
Starting + Stopping
mIMPORTANT! This spray washer is equipped with a
micro-switch sensitive to water ow. This Total Stop System
(TSS) senses water ow in the pump. When the trigger is
released, water stops owing through the pump. The TSS then
automatically turns the motor o to protect the pump from
overheating, thus saving energy and prolonging pump life.
Fig. 2
Battery
indicators
Hose
Fig. 3
Connector collar
Water outlet
Stopper plug
Fig. 4
Spray gun
Hose
Loading ...
Loading ...
Loading ...