Loading ...
Loading ...
Loading ...
11
Operating the Dishwasher
1. On/O Button
2. Program Selection /Program Cancel Button
3. Function Buttons & Indicators
F1 Half Load
F2 Sanitize
F3 HighGloss
F4 Intense Wash
4. Program Indicator
5. Salt Indicator (depending on model)
6. Start/Cancel Indicator
7. Time Delay / Program Time Indicator
8. Time Delay Button
9. Time Delay Indicator
10. End of Program Indicator
11. Sanitized Indicator
12. Rinse Aid Indicator
• Open the door and load the dishwasher.
• Check that both upper and lower spray arms move freely.
• Pour correct amount of detergent into the detergent dispenser and close the lid.
• Push in the On/O button 1 and check that the display lights come on.
• Check the rinse agent level indicator 12. If necessary, re ll the rinse agent.
• Check the salt level indicator 5. If necessary, re ll salt (select models).
• Use the Program Selection Button 2 to choose your washing program.
• When there are few dishes, additionally use the Half Load function (F1).
• Select other desired functions.
• Close the door and the program will start.
• When the wash program has ended, an electronic beep will sound and will continue every 10 seconds. After two minutes of
elapsed time, the sound will stop. The beep can also be stopped by opening the door or by pressing the On/O button 1.
• Press the On/O button 1 and open the door after the program is completed. The indicator lights will go o .
• Allow your dishes to cool for 15 minutes, with the door open.
• Unload the dishes. Begin with the lower rack.
If you do not perform any operation after seitching on the machine,
it will be automatically switched o within 5 seconds.
NOTICE
Avoid opening the door during the wash cycle. This
interrupts the washing process, and hot steam will escape.
Hot steam can cause burns and other serious injuries.
When the door is closed, the program will continue.
CAUTION
Floor Lighting Indicator
Your dishwasher will light the oor during the wash operation. The light will turn o automatically at the end of the washing
operation. NOTE: When the washing program begins, the light indicator feature activates itself automatically and will
automatically turn o at the end of the cycle. This feature is an option that cannot be turned o by the consumer.
Hot steam can escape! Danger of serious burns or other
injury.
CAUTION
6
11 10
Loading ...
Loading ...
Loading ...