Loading ...
Loading ...
Loading ...
23
EN
Non-friendly cookware
Uneven
pot bottom
Pot bottom
with feet
Pot bottom with
small diameter
System protection functions
1 Plate overheating protection: When the hotplate heats up to 650°C, it is
automatically cooled down.
2 Inner overheating protection: When the inner temperature of the machine reaches
100°C, heating is stopped.
3 Overvoltage protection: If the voltage exceeds 270V, the hotplate will not be
heated any further.
4 Low voltage protection: If the voltage is below 100V, the hotplate will not be
heated any further.
5 Constant power protection: If the power supply voltage increases (in 270 V) and
the output current declines, the maximum output power decreases with changes.
TROUBLESHOOTING
Problem Possible Solution
Plug the mains plug into the wall socket.
Press the ON/OFF button, the display
does not light.
Check that the mains plug is plugged
into the wall socket correctly and that
the wall socket is in good condition.
The On/Off indicator does not light. Check if the display or the main board
are in good condition.
During operation, the heating process is
suddenly stopped.
Check whether the following causes
have occurred: the surrounding
temperature is high or the set timer time
has been reached. If the overheating
protection has been started, do not put
the hotplate back into operation until
after 10 minutes. The hotplate switches
off automatically during operation after
2 hours of non-use.
The power cord is damaged. Have the defective power cord replaced
by an authorized electrician with a
power cord of the same model.
Loading ...
Loading ...
Loading ...