Loading ...
Loading ...
Loading ...
POLE SAW ATTACHMENT — PSA1000 33
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Motor does not
run.
The battery pack is not
attached to the pole saw.
Attach the battery pack to the pole
saw.
No electrical contact between
the saw and battery.
Remove battery, check contacts and
reinstall the battery pack.
The battery pack is depleted.
Charge the battery pack.
The lock-off button is not
depressed before pressing
the trigger.
Press down the lock-off lever and
hold it, then depress the trigger to
turn on the pole saw.
The battery pack or power
head is too hot.
Allow the battery pack or power head
to cool until the temperature drops
below 152°F (67°C).
Saw chain is bound in the
wood.
Release the trigger; remove the saw
chain and guide bar from the wood,
then restart the pole saw.
Debris in bar groove.
Press the saw chain against the
wood, move the pole saw back and
forth to discharge the debris.
Debris in chain-sprocket
cover.
Remove battery pack, then remove
chain-sprocket cover and clean out
debris.
Motor runs, but
chain does not
rotate.
Chain does not engage drive
sprocket.
Remove the battery pack and reinstall
the chain, making sure that the drive
links on the chain are fully seated on
the sprocket.
Loading ...
Loading ...
Loading ...