Loading ...
Loading ...
Loading ...
Mounting Recommendations
There are various fastening techniques, but some of the most common situations call for the
use of a lag bolt. This method is common when mounting panels onto a roof with a wood or
asphalt surface. The following is a basic approach and should be taken as such.
Use a power drill with socket extension to drill the lag bolt into the hole.4.
Drill until sufficient load is applied.5.
2.
Drill 4 holes where the holes on the L-Bracket Feet line up. A power drill with a sufficient
drill but should be utilized in this process.
1.
Find a desired mounting location
3.
After the hole has been drilled, silicone sealant needs to be administered to the hole in
order to prevent leaks.
The following information is intended to be a basic guide to give the
user a basic approach to mounting. A proper roof-mounting guide
should be consulted prior to beginning any installation.
NOTE
11
Loading ...
Loading ...
Loading ...