Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
My shredder isn’t working.
• Make sure that the power cord is plugged into a working power outlet. If the power
cord is damaged, replace it.
• Make sure that the shredder head and wastebasket are positioned correctly.
• If the Overheat indicator is on, let your shredder cool at least 20 minutes. When the
indicator turns o, you can use your shredder again.
• Change the position of the paper as you insert it.
• The paper may be too thin or crumpled for your shredder to recognize it. Fold the
paper, then reinsert it.
• Press Fwd.
• Make sure that you only send 10 sheets of paper, one credit card, or one disc
through your shredder at a time.
My shredder is jammed.
• Press Rev, remove the paper from the cutter, then press Auto and try again.
The cutter won’t stop.
• Turn your shredder o and unplug it, then push the shredded paper down to make
sure that it is away from the shredder head.
• Press Rev to remove the paper, disc, or credit card from your shredder.
My shredder is too noisy.
• Make sure that your shredder is on a at, level surface.
• Make sure that the shredder head and wastebasket are positioned correctly.
The Overheat indicator is lit.
• Let your shredder cool at least 20 minutes. When the indicator turns o, you can use
your shredder again.
The Overload indicator is lit.
• Make sure that you haven’t put too much paper into your shredder at one time.
Press Rev, remove the paper from the cutter, then try again with less paper.
SPECIFICATIONS
• Dimensions (H×W×D): 19.4 × 14.4 × 10.3 in.
(49.4 × 36.7 × 26.3 cm)
• Cutting style: Micro cut
• Entry width: 8.6 in. (22 cm)
• Shred capacity: 10 sheets (75 g/m2 A4 paper)
1 disc or credit card
• Shred size: .16 × .5 in. (4 × 12 mm)
• Shred media: Paper, staples, credit cards, and discs
• Shred speed: 1.8 m/min.
• Duty cycle: 15 minutes ON / 20 minutes OFF
• Net weight: 18.5 lbs. (8.4 kg)
• Basket capacity: 5.3 gal (20 l)
• Rated input: 120 V~, 60 Hz / 2.5 A
• Security level: P-4
• Noise level(db) @ Non-loading at 1 M distance: 65 dB
LEGAL NOTICES
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-003(B)/NMB-003(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
V2 ENGLISH 21-0462
IMPORTANT SAFETY INFORMATION
Please read thoroughly
Before using the shredder, please read the guide and become familiar with the safety information, operating
instructions, and maintenance requirements. Follow all warnings and instructions in the guide and as marked on the
shredder. Do not attempt to service this unit by yourself. Doing so will void the manufacturer’s warranty and may
expose you to sharp cutting blades and/or high voltage electric shock that could cause serious injury. Any repairs must
be performed by qualied service personnel.
11. Keep in the OFF position when the shredder is not in use for prolonged periods of time.
12. Empty wastebasket frequently.
13. The document shredder must always be deactivated and disconnected from the electrical line prior to moving,
transporting, and cleaning the device and prior to emptying the wastebasket.
14. The device may not be operated with a damaged power cord.
15. For indoor use only.
16. To protect the machine, we suggest the user to operate it in this way: work 15 minutes then rest 20 minutes.
17. The machine allows a maximum shred 10 sheets paper (75 gsm) or 1 credit card or 1 CD at one time.
18. The socket-outlet must be installed near the equipment and must be easily accessible during use.
1. Read
instructions
before use
3. Avoid
touching the
document feed
opening with
hands
5. Product is not
intended for use
by children
(product is not a
toy)
4. Do not spray or keep any
aerosol products in or around
shredder
2. Avoid loose
clothing or
jewelry touching
the document
feed opening
7. Shredder
oil only
6. Avoid
getting hair
near the
document
feed opening
8. Sharp edges,
do not touch
9. This equipment is not
intended for use by children.
Avoid touching the media feed
opening with the hands,
clothing or hair. Unplug this
equipment when not in use of
an extended period of time.
10. Warning!
Before switching
the machine on,
make sure that
you observe all
safety
instructions
Loading ...
Loading ...