Loading ...
Loading ...
Loading ...
9
4.6 The Standby Control Funcon
While the refrigerator is operang, press and hold the SET key for 3 seconds, and the
refrigerator will enter standby funcon mode. The standby indicator will light up, and all
sengs will stop working.
While the refrigerator is in standby, press the SET key, and the refrigerator will resume
normal operaon. In addion, since the refrigerator is now operang normally, the standby
indicator will turn itself off.
4.7 Duct Panel Operaon
1.
The inial sengs are 3 on the refrigerator control
panel and
MID on the freezer temperature control dial.
2. If the ambient temperature is less than 10 degrees,
the recommended refrigerator control panel seng is 4
or 5 with the freezer temperature control dial at the
COLDER posion.
3. If the ambient temperature is higher than 43 degrees,
the recommended refrigerator control panel seng is 4
or 5 with the freezer temperature control dial at the MID to COLDER posion.
TIP: Leaving the freezer temperature control dial on the COLD seng will help keep foo
d cold
in the freezer. However, leaving the control dial on the cold seng for an extended period of
me may cause items in the refrigerator to freeze.
5. CLEANING
5.1 Defrosng
Auto-defrost for a frost-free refrigerator.
5.2 Cleaning the Interior and the Exterior of the Unit
Remove all the shelves and the vegetable and fruit drawers. To remove the drawers, first
remove the lower door shelf.
Wipe the inside of the unit with a warm water and baking soda soluon and then rinse with
warm water using a sponge or cloth once yo
u wring the excess moisture out of it. Wipe
completely dry before replacing the shelves and the vegetable and fruit drawers.
Use a damp cloth to clean the exterior, and then wipe with a kitchen appliance wax or a mild
liquid dish detergent. Dry and polish with a clean, so cloth. Make sure that the door is
closed to avoid the kitchen wax geng on the magnec door seal or inside the unit.
The grill of the condenser at the back of the unit and the adjacent components can be
vacuumed using a so brush aachment. Before cleaning the condenser, turn the
temperature dial to 0. Then sweep or
vacuum up the dust.
Loading ...
Loading ...
Loading ...