HP 4PA41A#BGJ User Manual

Loading ...

Touchscreen control panels

1. From the Home screen on the printer control panel, touch the Setup button.

2. Scroll to and touch the Network Setup menu.

3. Touch the IPv4 Cong Method menu, and then touch the Manual button.

4. Use the keypad on the touchscreen to enter the IP address, and touch the OK button. Touch the Yes button

to conrm.

5. Use the keypad on the touchscreen to enter the subnet mask, and touch the OK button. Touch the Yes

button to conrm.

6. Use the keypad on the touchscreen to enter the default gateway, and touch the OK button. Touch the Yes

button to conrm.

Link speed and duplex settings

NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks.

The link speed and communication mode of the print server must match the network hub. For most situations,

leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the

printer from communicating with other network devices. To make changes, use the printer control panel.

NOTE: The printer setting must match the setting for the network device (a network hub, switch, gateway,

router, or computer).

NOTE: Making changes to these settings causes the printer to turn o and then on. Make changes only when

the printer is idle.

NOTE: The steps vary according to the type of control panel.

1 2 3

1 2-line control panel (fax models)

2 2–line control panel

3 Touchscreen control panel

ENWW Congure IP network settings 117

Loading ...

HP 4PA41A#BGJ jet Pro M148dw All-in-One Wireless Monochrome Printer, Mobile & Auto Two-Sided Printing, Works with Alexa (4PA41A)