Netgear XS708T-100NES User Manual

Loading ...

Step 6: Connect Devices to the Switch

The following procedure describes how to connect devices to the switch’s RJ-45 ports.The switch supports

Auto Uplink technology, which allows you to attach devices using either straight-through or crossover cables.

Use a Category 5 (Cat 5), Cat 5e, or Cat 6 cable that is terminated with an RJ-45 connector.

Ethernet specifications limit the cable length between the switch and the attached

device to 328 feet (100 meters).

Note

To connect devices to the switch’s RJ-45 ports:

1. Connect a PoE or non-PoE device to an RJ-45 network port on the switch front panel.

2. Verify that all cables are installed correctly.

Step 7: Check the Installation

Before you apply power to the switch, perform the following steps.

To check the installation:

1. Inspect the equipment thoroughly.

2. Verify that all cables are installed correctly.

Installation

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch

Loading ...

Netgear ‎XS708T-100NES 8-Port 10G Ethernet Smart Switch (XS708T) - Managed, with 2 x 10 Gigabit SFP+, Desktop or Rackmount, and Limited Lifetime Protection