Loading ...
Loading ...
Loading ...
LOCATION
The air conditioner should be placed on a hard and level surface strong enough to support the unit. The unit has casters and it should
only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects. Never
place any obstacles around the air inlet or outlet and allow at least 20 of clearance for efficient air-conditioning.
EXHAUST HOSE INSTALLATION
When using the air conditioner in COOL mode, hot air must be
exhausted out of the room to complete the air exchange of the
condenser. When the unit is operating in DRY or FAN only mode,
installation of the exhaust hose is optional.
1. Snap the hose connector to the unit onto one end of the hose
and then snap the hose connector to the window onto the
other end. See Fig. 1
2. Line-up the hose connector hooks onto the back of the unit
and slide into the hole seat. See Fig. 2
3. Only extend the exhaust hose to the necessary length
keeping it as short and straight as possible.
WINDOW KIT INSTALLATION
The window kit has been designed to fit most standard vertical and horizontal windows. However, it may be necessary to modify the
installation procedures to accommodate your window. Please refer to Fig. 3a and Fig. 3b for minimum and maximum window openings. If
your window opening is less than the mentioned minimum length of the window slider kit, the window slider kit can be cut to fit the
window opening. Never cut into the exhaust hose cut-out on the window slider kit.
If your window opening is larger than the maximum length of the window slider kit, additional material will be needed to cover the open
space such as, Plexiglas, PVC plastic, ply wood, etc. Alternately, an additional window slider kit can be purchased to be used in
combination with the included kit.
NOTE: When using the window slider kit on a window or sliding door, additional security measures may be needed.
The window slide bars can be fixed with the clear plastic bolt. Fig. 4.
Fig. 3a Fig. 4
Fig. 3b
Fig. 1
Fig. 2
Hole Seat
Hook
Clear plastic
plug
SCALE 0.500
Page 16
Loading ...
Loading ...
Loading ...