Loading ...
USING YOUR ELECTRIC KETTLE
1 Connect the power cord to a power outlet.
2 Press the power switch down to turn on the kettle. The light turns on
and the water begins to heat.
After the water has boiled, the kettle turns o automatically and the
light in the base of the kettle turns o.
To shut o the power, lift the power switch to the o position.
Note: Make sure that the power switch is clear of obstructions and the lid is
rmly closed. Otherwise, your kettle will not turn o.
3 Lift the kettle from the base, then pour the water.
Note: The kettle will not re-boil until the switch is turned on. Let the kettle
cool for 15~20 seconds before trying to reheat the water.
WARNINGS:
• Use caution when pouring the water from your kettle. Contacting
boiling water may result in a serious burn.
• Do not open the lid while the water in the kettle is hot.
Boil-dry protection
If you try to operate the kettle without water, the boil-dry protection
automatically turns it o. If this should occur, let your kettle cool before
lling with cold water.
CLEANING AND MAINTAINING YOUR ELECTRIC
KETTLE
• Always unplug the power cord and let your kettle cool down
completely before cleaning.
• Never immerse your kettle, cord, or base in water, or let moisture
come in contact with these parts.
• Do not use chemicals, steel wool, or abrasive cleaners to clean the
outside of your kettle. These substances can scratch the surface or
fade the color.
Removing mineral deposits
1 Fill your kettle with three cups of white vinegar and the remainder
with water and let it stand overnight. Do not boil.
2 Empty the solution from your kettle. Remove remaining stains with a
damp cloth.
3 Boil two full kettles of water, then discard the water.
Cleaning the outside
Wipe the outside of your kettle with a damp cloth or sponge.
V2 ENGLISH 21-0598
FILLING YOUR ELECTRIC KETTLE
Notes:
• Before using your electric kettle for the rst time, clean your kettle by boiling
two full kettles of water, then discarding the water.
• Never ll the kettle with any liquid other than water.
1 Place the base on a at, heat resistant surface, as close as possible to a
power outlet.
2 Remove the kettle from the base, then open the lid by pushing the lid
button on the handle.
3 Fill with the desired amount of water.
4 Close the lid and place the kettle on the base, making sure that the
kettle contacts the base completely.
STORING YOUR ELECTRIC KETTLE
You can store your kettle on the base when you are not using it.
Note: Make sure that the power cord is unplugged when your kettle is not in
use. When you unplug the power cord, it retracts into the power base.
TROUBLESHOOTING
Do not try to repair your kettle yourself. Doing so invalidates the
warranty. If problems persist after you try the solutions below, contact
Best Buy technical support.
The kettle and indicator light do not work when the power switch is
turned on.
• Make sure that your kettle is seated properly on the base and that the
base is connected to a functioning electrical outlet.
The water is boiling, but the power switch and indicator light are
still on.
• The auto-shut o function does not operate properly if the lid is not
completely closed. Let the kettle cool, then make sure that the lid is
properly locked into place.
The kettle will not turn on.
• Make sure that the kettle is seated properly on the base and that the
base is connected to a functioning power outlet.
• Water or debris on the bottom of your kettle or on the base may
interfere with the functioning of your kettle. Make sure that the
bottom of your kettle and the base are dry and free of debris.
There are mineral deposits inside the kettle.
• Before using your electric kettle for the rst time, clean your kettle by
boiling two full kettles of water, then discarding the water.
• A certain amount of scale build-up is normal after long periods of use
and is caused by minerals contained in hard water. The best way to
prevent mineral deposits is to always use distilled water in the kettle.
• To remove deposits, try lling your kettle with water and a few slices of
lemon, then boil.
SPECIFICATIONS
• Dimensions (H×W×D): 9.8 × 8.9 × 6.1 in. (25.1 × 22.7 × 15.6 cm)
• Weight: 2.4 lbs (1.1 kg)
• Capacity: 1.7 L (1.8 qt)
• Power requirements: 1500W
• Power cord length: 2.3 – 2.46 ft (.7 – .75 m)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer support, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
Notes:
• Always ll the kettle between the minimum
(0.5L) and maximum (1.7L) marks. Too little
water results in the kettle turning o before the
water has boiled. Too much water results in
boiling water ejecting.
• Make sure that the lid is rmly in place before
connecting the power cord to the outlet.
NS-EK17GL0_21-0598_QSG_V2_EN.ai 2 6/14/2021 2:28:16 PMNS-EK17GL0_21-0598_QSG_V2_EN.ai 2 6/14/2021 2:28:16 PM