Loading ...
68221
actual
size
Connect and secure cable to interior assembly.
D
a
b
Connect cable.
Ensure tight cable connection.
Insert key and
turn 90° clockwise.
Tighten pre-installed set screw
to secure exterior lever.
Turn key back to vertical
position to remove it.
Install and secure
interior lever.
Install exterior lever.
A B C D E
Tighten
pre-installed
set screw.
If latch is loose in the
strike, adjust the strike
tab so it grips the latch
bolt better when the
door is closed.
tab
Close door, test latch operation and make adjustments as needed:
small bolt in
strike hole
small bolt NOT
in strike hole
H
Lever handle
faces away
from the latch.
J1 or
J2
K
Route cable through clips.
a
Install interior assembly
while holding the exterior
assembly. Make sure the
spindle fully engages with
the interior assembly.
b
Secure interior assembly
with mounting screws.
K
Q (2x)
Connect 9V battery. Secure battery into interior
assembly.
Reinstall battery cover.Remove interior cover.
A B C D
L
Hold exterior assembly.
M
Red side must face left.
For commercial use:
Installing the security
set screw will lock
the interior cover and
prevent easy access
to the battery and
reset button.
R
If you installed
the security screw
in step 3C, you will
need to remove it to
install the battery.
The small bolt of the
latch should not enter
the strike hole. If it
enters the strike hole,
reposition strike.
Hole on lever
faces down.
To access
the hidden
pre-installed set
screw on the
lock, the key
must be turned
horizontal.
set
screw
H
H
set
screw
H
J1 or
J2
Install exterior keypad.
rounded edge
faces latch
latch
Install spindle.
Install interior assembly and secure with mounting screws.
A B
E
cable goes
under latch
Q
Ensure both interior and
exterior assemblies are
parallel to edge of door
before securing.
R
OPTIONAL: Install security set screw.
C
Interior assembly
Note:
Tighten screws evenly
and do not overtighten .
2 / 4
3
4
Install the exterior keypad, spindle, and interior assembly
5
6
Install levers
Test latch operation
Install battery
G
F
Loading ...
Loading ...