Loading ...
Loading ...
Loading ...
10
Listening to an External Audio Device (Bluetooth Mode)
In BT (Bluetooth) mode, this unit can play music from external devices that have a built-in Bluetooth
feature.
GETTING CONNECTED USING BLUETOOTH
1. Select “FM/ ” mode.
2. Slide the slide switch on “ ” and the ST/BT indicator will flash blue.
3. Turn ON the Bluetooth function on your external device.
NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft).
4. Wait for “Wooden Music Center” to appear on the paired devices list of your external device and
press “Wooden Music Center”.
In some instances: a window will ask you a password. Fill in “0000” then press “OK” on your external
device.
5. A few seconds later your Bluetooth connection is successful and the blue indicator stays lit.
6. Press the PLAY/PAUSE button ( ) to begin playback.
7.To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume.
8.To skip to the previous or next tracks, press the corresponding skip button ( or ) to listen.
NOTE: Stop, fast forward / rewind are only available on your external device.
Listening to a Cassette Tape
1. Load an audio cassette tape into the unit (located on the left side of the unit). Playback will
automatically begin.
2. Press button halfway to Fast Forward the tape.
Press button lightly and playback will resume.
3. Press button completely down to end playback and eject tape.
NOTE: When loading in a cassette tape, the SELECTION KNOB function will be temporarily
overridden until the cassette tape is ejected.
Maintenance / Proper Handling
Compact Disc Handling
• Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recorded
only on one side)
• To remove a disc from its storage case, press down on the center of the case and lift the disc
upward, holding it carefully by its edges.
• To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth.
• Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean discs; they will
irreparably damage the disc’s plastic surface.
• Discs should be returned to their cases after use to protect from dust and scratches.
• Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods of time.
• Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky and damage the
unit.
• Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or hard-tipped
pen, as doing so may damage the recorded side.
• Do not use irregularly-shaped CDs (octagonal, heart shaped, business card size, etc),
as they will damage the unit.
• Read all precautions supplied with any CD-R or CD-RW disc
• Never handle a disc with dirty fingers.
• Never insert a disc that has a crack on the surface.
Loading ...
Loading ...
Loading ...