Loading ...
Loading ...
Loading ...
EN
W415-1542 / C / 01.13.16
10
Due to the many different materials used on different walls, it is highly
recommended that you consult your local builder before you install this
appliance on the wall.
A. Select a location that is not prone to moisture and is located at least
36" (914mm) away from combustible materials such as curtain
drapes, furniture, bedding, paper, etc.
B. Have two people hold the appliance against the wall to determine the
fi nal location.
C. Place unit face down on a soft, non abbrasive surface. Remove the
bracket from the back of the unit by removing the screws, refer to
Figure 1.
D. Mark out location, then mount the bracket(s) onto the wall using the supplied screws. This bracket
MUST have the hooks facing upward and be level. NOTE: It is strongly recommended that the
mounting bracket be screwed
into the wall studs where
possible. If the wall studs
cannot be used, ensure that
the supplied plastic anchors
are used to affi x the bracket
to the wall and the bracket is
adequately secured.
E. With the wall mounting bracket installed have two people lift the appliance up and insert the two hooks
on the bracket into the two slots on the back of the appliance.
F. Check the appliance for stability ensuring that the bracket will not pull free from the wall.
3.3 INSTALLING THE APPLIANCE ONTO THE WALL
HOOK
SCREWS
HOOK
SIDE VIEW
BODY
FLOOR
GLASS FRONT
21 5/8"
550mm
NEFL32/42/50FH BRACKET ILLUSTRATED
NEFL60/72/100FH BRACKET ILLUSTRATED
Loading ...
Loading ...
Loading ...