Loading ...
Loading ...
Loading ...
6
Setting the CURRENT Time
NOTE: You do not need to set the CURRENT time if you are not using the PROGRAM (future brew) feature.
1. Plug the Coffee Maker into a 120V AC electrical wall outlet. The LCD display will illuminate blue.
NOTE: By default, 12:00 AM will be displayed, and will be ashing.
2. Press the HOUR button to increase the hour. Once the desired hour is displayed, press the MIN button to
increase minutes until the CURRENT time is displayed. Press and hold HOUR or MIN to toggle quickly.
NOTE: Pay attention to the AM and PM setting.
NOTE: The blue backlit LCD display will advance to sleep mode within 15 seconds if no buttons are pressed.
The CURRENT time can be changed at any time by simply repeating Step #2.
IMPORTANT: If you unplug and replug the Coffee Maker it will reset to the default time.
BREWING COFFEE
Making Coffee Immediately
NOTE: The amount of brewed coffee will always be less than the amount of water placed into the water reservoir;
as much as 10% is absorbed by coffee grounds and lter.
1. Lift to open the Coffee Maker lid. Fill carafe with cold tap water and pour into water reservoir at the back
of the unit. The water level can easily be seen from the viewing window on the side of the unit.
NOTE: Ensure water does not exceed the 12 cup line.
2. Place empty carafe on the warming plate.
3. Place the permanent lter in the removable lter holder. Measure 1 level tablespoon or 1 scoop with
theprovided scooper cup, of drip or regular grind coffee for each cup of coffee desired. For stronger
ormilder coffee, adjust amount of coffee to suit your taste.
4. Lower the lter holder down into the housing. Close the lid.
5. Plug the power cord into 120V/60HZ power supply outlet and press the ON/OFF button once; the light
around the ON/OFF button will be illuminated (blue). The appliance will begin working.
NOTE: You can take out the carafe, pour and serve at any time. The appliance will stop dripping
automatically, but the time cannot exceed 30 seconds.
NOTE: To cancel the brew cycle at any time, press the ON/OFF button.
WARNING: Do not open water reservoir lid when the coffee maker is operating.
6. When the brew cycle is complete 3 audible beeps will be heard and the Coffee Maker will advance
toKEEPWARM function and the TIME SINCE BREW icon
will appear on the LCD display.
7. The light around the ON/OFF button will remain illuminated and the clock will begin to count
up to 2 hours indicating the time since brew.
NOTE: As safety is concerned, be sure to cover the lid of carafe when pouring.
NOTE: To keep the coffee warm, return the carafe to the warming plate after pouring the coffee.
Thecoffee can be kept warm for up to 2 hours.
NOTE: To check the current time press the PROG/BOLD button. The TIME SINCE BREW icon
will
disappear and the current time will appear for 5 seconds. Once the 5 seconds is reached, the time since
brew and the TIME SINCE BREW icon
will reappear.
8. After 2 hours the appliance (and carafe warming plate) will turn off automatically and will beep 3 times.
The TIME SINCE BREW icon will disappear and the light around the ON/OFF button will turn off.
Thecurrent time will reappear on the LCD display
NOTE: Unplug the power cord from the electrical outlet when the appliance is not in use, left unattended,
or when the carafe is empty.
Setting the PROGRAM (Future Brew) Time
Coffee Maker can be programmed to begin brewing up to 24 hours in the future.
1. Press the PROG/BOLD button until the word “PROG” appears on the LCD display.
NOTE: By default, 12:00 AM will be displayed, and will be ashing. The blue backlit LCD display will
advance to sleep mode and the “PROG” icon will disappear within 15 seconds if no buttons are pressed.
2. Press the HOUR button to increase the hour. Once the desired hour is displayed, press the MIN button.
Press and hold HOUR or MIN to toggle quickly.
3. When the future auto PROGRAM time is displayed, press the PROG/BOLD button. An audible beep
conrms the selection and “PROG” appears in the display. The ring around the PROG/BOLD button
willilluminate blue.
NOTE: Pay attention to the AM and PM setting.
NOTE: Make sure the coffee maker is ready to brew by repeating steps 1-5 of the MAKING COFFEE
IMMEDIATELY section
SO-312565_14438_BELLA_12 cup CM Progra._Shopko_iM_R5.indd 6 2015-07-14 8:29 AM
Loading ...
Loading ...
Loading ...