User Manual Kwikset 599 26D SMT Gatelatch - Keyed Both Sides - featuring SmartKey

Documents for Kwikset 599 26D SMT

The following documents are available:
User Manual Installation Instruction
  • Instructions to re-key a SmartKey Security lock - (English) Download
Photos
599 26D SMT photo
Install latch so that slant
of bolt faces in direction
that door closes.
Instale el pestillo de
manera que la inclinación
del perno se enfrenta
a la dirección en la que
la puerta se cierra.
slant
inclinación del perno
Press bolt while centering interior plate in latch.
Presione el perno y alinea la placa interior en el pestillo.
interior
plate
placa
interior
Secure latch with screws.
Fije el pestillo con
los tornillos.
Press bolt to drop
interior plate to
bottom of latch.
Presione el perno
para bajar la placa
interior a la parte
inferior del pestillo.
Once interior plate is centered,
bolt will not be fully extended.
This is temporary.
Una vez que la placa interior
está alineada, el perno no será
completamente extendido.
Esto es temporal.
door frame
marco de la puerta
D
The bolt should now
be fully extended.
El perno debe estar
completamente extendido.
Keep screw guide for
reinstallation in step 4.
Mantenga la guía de tornillo para
la reinstalación en el paso 4.
screw
guide
guía de
tornillo
A
If drilling a new door, use
the supplied template and
the complete door drilling
instructions available at
kwikset.com/doorprep
Si va a perforar una puerta
nueva, utilice la plantilla
suministrada y las instrucciones
completas para la perforación
de la puerta estan disponibles
en kwikset.com/doorprep
Parts in the box
Piezas en la caja
Required tools
Herramientas necesarias
Latch
Pestillo
Strike
Placa
Screws
Tornillos
Keys
Llaves
Deadbolt
Cerrojo
SmartKey® tool
Herramienta SmartKey
23/8" (60 mm)
13/8"–21/4"*
35 mm–57 mm*
21/8"
54 mm
64438 / 01
599 SMT
A B C D
J K L M
23/8" (60 mm)
Backset Distancia al centro
Centerline
13/8" (35 mm)
13/4" (44 mm)
21/4" (57 mm)
Edge of the door
Borde de la puerta
Fold
Doble
Linea central
Drilling Template
Plantilla de perforación
Instructions continue on reverse
Las instrucciones continúan en el reverso de la hoja
A
B
C
*Call Kwikset to order
a service kit for 21/4"
(57 mm) thick doors.
*Llame a Kwikset para
pedir un kit de servicio
para puertas gruesas
con un espesor de
entre 57 mm (21/4").
Template is only needed if a new hole must be drilled in the door.
La plantilla solo se necesita en caso de que deba
perforarse un nuevo oriicio en la puerta.
1"
25 mm
Installation Guide
Guía de instalación
18003275625 • www.kwikset.com
Face of the door
Frente de la puerta
A
E (2x) E
E
E
G
S
T
Prepare door and check dimensions
Prepare la puerta y revise las dimensiones
1
Remove screw guide from latch
Retire la guía de tornillo del pestillo
2
Install latch
Instale el pestillo
3
Loading ...