204305 User Manual

Loading ...

BlueParrott C400-XT User Manual

PAGE 10

Manual Pairing

If the C400-XT has already been paired with another device and you are not going to

use NFC Pairing, you will need to put it into Pairing Mode manually:

Placing Headset into Pairing Mode

By Voice:

Activate headset voice recognition by pressing the Parrott Button or by pressing and

holding the Volume Up button. Then, after the prompt, say “pair mode.” The headset

will enter pairing mode and be visible for pairing to devices for 120 seconds.

Using Buttons:

With the headset powered off, press the MFB until the light rapidly flashes blue and

you hear the audio prompt “power on.”

Keep holding

the MFB for approximately 10

seconds until you hear “Pair Mode.”

The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the headset into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s

instructions.

4. Select “BP C400-XT” to pair. (Passcode is “0000” if needed.)

5. Accept the phone book access request to enable caller ID in the headset.

6. When connected, the headset will give you the voice prompt, “Your headset is

connected.”

GETTING STARTED (continued)

Loading ...

BlueParrott 204305 B450-XT MS Noise Cancelling Bluetooth Headset – Hands-Free Wireless Headset Programmed with Access to Microsoft Teams Walkie Talkie – Long Wireless Range, 24+ Hrs of Talk Time, IP54-Rated