Loading ...
Loading ...
Loading ...
Operating instructions
1-7
1-7
(1) LOCK NUT
(2) ADJUSTING BOLT
(A) RAISE THE PEDAL HEIGHT
(B) LOWER THE PEDAL HEIGHT
Brake pedal height
The brake pedal height can be adjusted to the rider’s pre-
ference.
To adjust the rear brake pedal height:
1. Loosen the push rod lock nut and brake pedal adjusting
bolt lock nut. Then turn the both adjusting bolts in
direction “A” to raise the pedal, or in direction “B” to
lower it.
2. Tighten the lock nuts at the desired pedal height.
3. After adjustment, check the brake pedal free play at
the top of the pedal.
Make sure that the clearance between the front adjus-
ting bolt and frame is at least 1 mm (0.04 in).
(1) MODE SWITCH
(2) MODE 1
(3) MODE 2
Mode switch
The ECU for the COTA 301RR PGM-FI electronic injection
system has two operational maps which can be selected
depending on the conditions:
Switch in Mode 1:
Standard
Switch in Mode 2:
Powered
Magnetic stop switch
Pull the stop magnetic switch (red) until the engine stops
completely.
(1) ENGINE STOP BUTTON
1
3
2
1
A
A
B
B
1
1
2
3
4
Loading ...
Loading ...
Loading ...