Loading ...
Loading ...
Loading ...
(1) PAD SPRING PIN
(2) BOLTS
(3) DISC COVER
(4) CALIPER
Front Brake Pad Replacement
Clean the brake disc with a high quality degreasing agent
if they are contaminated with oil or grease.
Replace the pads if they are contaminated.
Remove the brake caliper mounting bolts, disc cover,
flange collars and caliper.
Remove the circlip.
Remove the pad pin.
Remove the spring from the pads.
Push the pistons all the way in to allow installation of new
brake pads.
Check the brake fluid level in the reservoir as this operation
causes the level to rise.
Remove the brake pads.
Clean the brake caliper inside especially around the caliper
pistons.
(1) NEW PADS
(2) PAD SPRING
(3) PIN
(4) CIRCLIP
Install the new pads, the spring from the pads and secure
with the pad pin and the circlip.
Torque: 8 N•m (0.8 kgf•m, 5.9 lbf•ft)
Install the caliper to the fork so the disc is positioned
between the pads, being careful not to damage the pads.
Apply a locking agent to the caliper mounting bolt threads.
Install the disc cover, then install and tighten the mounting
bolts.
Torque: 26 N•m (2.7 kgf•m, 20 lbf•ft)
Operate the brake lever to seat the caliper pistons against
the pads.
5-24
5-24
Frame servicing
2
1
1
4
3
3
2
2
1
6
4
5
Loading ...
Loading ...
Loading ...