Loading ...
Loading ...
Loading ...
13
ASSEMBLY INSTRUCTIONS
(CONT’D)
13. Insert the pins of the glass door (O) into the
holes on the base (K).
Push the top of the glass door (O) inward
until the hole on the side frame is adjacent
to the hole on the side panel. Hand-screw
the pre-assembled knobs into the hole of the
glass door frame from each side.
K
1
O
13
2
14. WARNING: You must install the tip restraint
hardware (DD) to the back of the top (A) to
help prevent any accidents or damage to the
unit.
We strongly recommend attaching the tip
restraint hardware (DD) to a wall stud and
your unit. For all other wall types, please visit
your local hardware store to obtain the proper
hardware.
Assembly is now complete. With the help of
another person, move the unit to the final
desired position. Once in the final position,
you may attach the tip restraint hardware (DD)
to the wall. You may now plug the heater into
the power outlet.
Hardware Used
DD
Tip Restraint Hardware
x 1
DD
A
14
1
2
Loading ...
Loading ...
Loading ...