Loading ...
Loading ...
Loading ...
9
Unpacking
Carton Contents
• Cordless tiller + cultivator housing
• Upper handle
• Middle handle
• Cable clip (2)
• Handle knob, washer and bolt (4)
• Manual with registration card
NOTE: In order to operate this tiller + cultivator, you will need
to additionally purchase either the EcoSharp
®
(model iBAT40)
, the EcoSharp
®
PRO (model iBAT40XR) lithium-ion battery or
the EcoSharp
®
PRO (model iBAT40XRP) lithium-ion battery
and either the EcoSharp
®
charger (model iCHRG40) or the
EcoSharp
®
charger (model iCHRG40-DPC).
1. Carefully remove the cordless tiller + cultivator and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless tiller +
cultivator. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
m
WARNING! Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and serious personal injury.
mWARNING! To prevent serious personal injury, make
sure the battery is removed, and the blades have come to a
complete stop before inspecting, cleaning, or servicing the
unit.
mWARNING! The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
product.
1. Attach the cable clips on the middle handle bar (Fig. 1).
2. Secure the middle handle to the lower handle using the
rst set of knobs, bolts, and washers. Tighten the knobs
on each side to ensure a secure t (Fig. 2).
Fig. 1
Cable clips
Middle handle
Fig. 2
Knob + bolt + washer
Middle handle
Lower handle
Loading ...
Loading ...
Loading ...