Loading ...
Loading ...
Loading ...
15
3. Clean the drive shaft with biodegradable oil (Fig. 14).
4. Place the new blades onto the drive shaft so that the
holes on the axles line up with the holes on the drive shaft
(Fig. 14).
5. Insert the 2 bolts through the holes and secure them with
the 2 nuts (Fig. 14).
IMPORTANT:
The blades must be set in the correct turning
direction. Note the way the old blades came o and replace
the new ones exactly the same way.
Repair
This product does not contain any parts that can be repaired
by the consumer. Contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Storage
• Examine the cordless tiller + cultivator thoroughly for worn,
loose, or damaged parts. Should you need to repair or
replace a part, contact an authorized Snow Joe
®
+ Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563) for assistance.
• Remove the battery from the cordless tiller + cultivator
before storing.
• Clean the product as described above.
• Store the product and its accessories in a dark, dry,
frost-free, and well-ventilated place.
• Always store the product in a place that is inaccessible to
children.
• The ideal storage temperature is between 50ºF (10°C) and
86ºF (30°C).
• We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
Battery+ChargerO-SeasonStorage
1. Do not expose your battery pack or charger to water,
rain or allow them to get wet. This could permanently
damage the charger and the battery pack. Do not use oil
or solvents to clean or lubricate your battery pack as the
plastic casing can become brittle and crack, causing a
serious risk of injury.
2. Store the battery pack and charger at room temperature
away from moisture. Do not store in damp locations where
corrosion of terminals may occur. As with other battery
pack types, permanent capacity loss can result if the pack
is stored for long periods of time at high temperatures
(over 120ºF/49ºC).
3. EcoSharp
®
iBAT40, EcoSharp
®
PRO iBAT40XR and
EcoSharp
®
PRO iBAT40XRP lithium-ion battery packs
maintain their charge during storage longer than other
battery pack types. As a general practice, it is best to
unplug the battery charger and remove the battery pack
when they are not in use. Recharge the battery pack every
6 months to 50% capacity (2 lights on) during o-season
storage to maintain optimal battery performance.
4. The EcoSharp
®
iCHRG40 and the EcoSharp
®
iCHRG40QC
battery chargers have no serviceable parts.
Transportation
• Switch the product o. Ensure that the wheels are set to the
transport position (see Fig. 9, pg. 11).
• Always carry the product by its transport handle.
• If you are transporting the tiller + cultivator in a vehicle,
brace it properly to protect it from heavy impact or strong
vibrations.
• Secure the product to prevent it from falling over or
slipping.
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards or keep
it for long-term storage.
Fig. 13
2 bolts + 2 nuts
Steel
blades
Drive shaft
Fig. 14
2 bolts + 2 nuts
Loading ...
Loading ...
Loading ...