Loading ...
Loading ...
Loading ...
ASSEMBLY
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product with damaged or missing parts could result in
serious personal injury.
Do not attempt to modify this product or create
accessories or attachments not recommended for use
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
If any parts are damaged or missing, please call 800-406-2005 for assistance.
WARNING! WARNING!
OPERATION
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction of a
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
Applications
You may use this product for the following purpose:
• Light-duty vacuuming of dry surfaces
Installing/Removing the Battery Pack
See Figure 3, page 8
• Insert the battery pack into the battery port.
• Make sure the latches on each side of the battery pack
snap into place and that the battery pack is secured in
the hand vac before beginning operation.
• Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
hand vac.
Charging Battery Pack
See Figure 2, page 8
•
to 3 hours. Due to federal regulations, the battery does
not come fully charged.
• Plug the charger into a power outlet.
• Attach the battery pack to the charger by aligning the ribs
on the battery pack to the grooves in the charger. Slide
the battery pack into the charger.
• When charging, the lights on the battery will illuminate
to show the state of charge. The light on the charger
•
with the battery or the charger. Try again or call custom-
er service for support.
• When charge is complete the lights on the battery will
turn off and the light on the charger will be solid.
• To remove the battery pack from the charger, press the
latches and pull up on the battery pack.
Starting/Stopping the Vacuum
See Figure 3, page 8
• To start the vacuum: slide the ON/OFF switch toward the
front of the vacuum.
• To stop the vacuum: slide the ON/OFF switch toward the
back of the vacuum.
Crevice Tool
See Figures 4 & 5, page 9
• The crevice tool is stored on the underside of the
dirt cup.
• To detach the crevice tool, pull it forward and remove it
from the dirt cup.
• Turn off the vacuum.
• Remove the battery pack.
• Insert the attachment into the front end of the vacuum
into place.
Removing/Reattaching the Dirt Cup
See Figures 6 & 7, page 9
• The dirt cup should be checked, emptied, and cleaned
periodically for maximum dust collection.
To remove:
• Remove the battery pack.
• Depress the release button located on top of the hand
vac. Pull the dirt cup down and out.
To reattach:
• Position the two sections as shown. Align the slot on the
bottom of dust bowl with the tab on the bottom of motor
housing, then snap the two sections together.
WARNING!
WARNING!
WARNING!
PG.5
Loading ...
Loading ...
Loading ...