Loading ...
Loading ...
Loading ...
6
Wall / Ceiling Installation:
To install the plastic anchors into the wall, use a drill to place a hole in the wall. Using the hammer,
tap the plastic anchor into the wall until it is flush.
Cord Positioning:
The cord side of the heater should face downward when installed vertically or on an incline.
Correct Installation Incorrect Installation
TROUBLESHOOTING:
The heater contains no user-serviceable parts. Troubleshooting is limited to checking the power
source:
1. Check if the unit is turned on.
2. Check if the power cord is plugged into a properly-grounded electrical outlet.
3. Check if the electrical outlet’s circuit breaker/fuse is on and working
MAINTENANCE:
Periodic inspection and removal of dirt and contaminants will ensure that the heater can be
operated safely. Always perform maintenance and cleaning before operating the heater if it has
not been used in a long period of time.
1. Check the Reflector and IR-Filament at least once a month for dirt and dust. If cleaning is
necessary, follow the cleaning and maintenance instructions.
2. Inspect more frequently if the environment is prone to unusual amounts of dirt or dust.
3. Visually inspect the heater, power cord and plug for any damage or wear at least once per
month. If damaged or worn, consult with a technical service.
Note: Proper and regular maintenance is easy and important for the long and efficient operation
of your heater.
CLEANING:
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free
years. To clean your heater, follow the steps below:
1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing.
Loading ...