Loading ...
Loading ...
Loading ...
24
EN
5
Fasten the upper hinge on the left side and replace the cover. Insert the other cover on
the right side.
GETTING STARTED
Plug in and switch on the cellar by pressing on the power button for a few seconds.
When you use the wine cellar for the rst time (or restart the wine cellar after having it
shut off for a long time), there will be a few degrees variance between the temperature
you have selected and the one indicated on the LED readout. This is normal and it is
due to the length of the activation time. Once the wine cellar is running for a few hours
everything will stabilize.
Note: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before
restarting the unit. The wine cellar will not start if you attempt to restart before this
time delay.
Operating Noises
To reach the desired temperature settings, wine cellars, like all wine cellars operating
with compressors and fans, may produce the following types of noises. These noises are
normal and may occur as follows:
• Gurgling sound - caused by the refrigerant owing through the appliance’s coils.
• Cracking/popping sounds - resulting from the contraction and expansion of the
refrigerant gas to produce cold.
• Fan operating sound - to circulate the air within the wine cellar.
Loading ...
Loading ...
Loading ...