Klarstein 10031501 Finessa Cooker Extraction Hood

User Manual - Page 30

For 10031501.

PDF File Manual, 76 pages, Read Online | Download pdf file

10031501 photo
Loading ...
Loading ...
Loading ...
30
Disposal of carbon filter
Replace every 3 months and dispose of properly. Important: Increase the filter cleaning/replacement fre-
quency if the hood is used for Care and maintenance more than 2 hours a day. Always use genuine filters from
the manufacturer.
Troubleshooting
Fault Cause Solution
Excessive vibration The appliance is not installed properly
on the brackets.
Take down the appliance and check it is
properly fixed.
The fan blade is damaged. Switch off the appliance. Repair to be
carried out by qualified service personnel
only.
The fan motor is not fixed tightly.
Light on, but motor
does not work
The fan blade is jammed. Switch off the appliance. Repair to be
carried out by qualified service personnel
only.
The motor is damaged.
Both light and motor
do not work
Light bulb blown. Replace with a bulb of the correct rating.
Power connection loose. Check power supply.
Suction performance
reduced
Speed may be too low. Select a higher speed.
Distance between the cooker hood and
the hob is too great.
Readjust the distance to: Gas hobs: 760
mm, Electric hobs: 650 mm
Aluminium filters are dirty. Clean the aluminium filters. (See Care and
maintenance section.)
Top vent might be obstructed. Clear any obstruction.
Optional vent kit might be twisted. Ensure that the vent kit is fitted according
to the manufacturer's instructions.
Works normally but
cooking smells linger
Carbon filter is not fitted in recirculation
mode or is full of grease.
Fit carbon filter in or replace the carbon
filter. (See Care and maintenance section.)
Loading ...
Loading ...
Loading ...