Loading ...
Loading ...
Loading ...
19
DELAYED WASHING (PRESET TIMER)
This washing machine has a 0–24 hour delay start function which you can set to determine
the time when the washing program will finish.
NOTES: This function is not available for the DELICATE program. To avoid water leakage
when using this function, make sure the water taps are open, the drain hose is properly
installed and the washing load and detergent are properly prepared.
1. Put your washing in the machine, loading items uniformly in the tub.
2. Press the POWER button.
3. Select the required PROGRAM and any other WATER LEVEL, TEMPERATURE and
ULTRASONIC, if required.
4. Press the PRESET button to select desired time period (in hours) for the
wash to finish.
5. Select the Water Level, if necessary.
7. Close the lid and press the START/PAUSE button.
8. After setting the PRESET, the corresponding light will illuminate and all other
lights will be switched off about one minute later. From this time on until the
delayed time only the POWER and SET buttons will response when pressed.
9. To check the delayed program, press the SET button: the program will be
indicated for 5 seconds. During these 5 seconds you can press the WATER LEVEL
button and set the water level.
10. To cancel the PRESET (delay), shut off the power.
11. To change the delay time, first cancel the delay, then set it again.
HOW TO USE (Cont.)
ADDING DETERGENT
- WASHING DETERGENT
Either put detergent into the detergent
box or, if you prefer to put directly into
the wash tub, wrap the powder in a
small cloth.
- FABRIC SOFTENER
Dilute the softener with twice the
amount of water, then pour the
solution into the softener dispenser.
Loading ...
Loading ...
Loading ...