Loading ...
Loading ...
Loading ...
DJI Air 2S User Manual
26
©
2021 DJI All Rights Reserved.
Attaching the Propellers
Attach the propellers with marks to the motors with marks and the unmarked propellers to the motors
without marks. Press each propeller down onto the motor and turn until it is secure.
Flight Recorder
Flight data including ight telemetry, aircraft status information, and other parameters are automatically
saved to the internal data recorder of the aircraft. The data can be accessed using DJI Assistant 2
(Consumer Drones Series).
Propellers
There are two types of DJI Air 2S Low-Noise Quick Release Propellers, which are designed to spin in
dierent directions. Marks are used to indicate which propellers should be attached to which motors.
Make sure to match the propeller and motor following the instructions.
Propellers Marked Unmarked
Illustration
Position Attach on motors with marks Attach on motors without marks
Description Turn the propellers in the indicated direction to mount and tighten.
B
BA
A
2
1
APAS is disabled when using Intelligent Flight modes and recording at high resolution such as 2.7K
48/50/60 fps, 1080p 120 fps, 4K 48/50/60 fps, and 5.4K 24/25/30 fps.
APAS is only available when ying forward, backward, upward, and downward. APAS is disabled if
the aircraft ies left or right.
Make sure you use APAS when the Forward and Backward Vision Systems are available. Be sure
there are no people, animals, objects with small surface areas (e.g., tree branches), or transparent
objects (e.g., glass or water) along the desired ight path.
Make sure you use APAS when the Downward Vision System is available or the GNSS signal is
strong. APAS may not function properly when the aircraft is ying over water or snow-covered areas.
Be extra cautious when ying in extremely dark (<300 lux) or bright (>10,000 lux) environments.
Pay attention to DJI Fly and make sure the aircraft is working normally in APAS mode.
APAS may not function properly when the aircraft is ying near ight limits or in a GEO zone.
Loading ...
Loading ...
Loading ...