Loading ...
Loading ...
Loading ...
13
pro.Bose.com WP22BU-D Installation Guide
channel 1. However, the second Dante output comes from one of three
possible input mixes:
• A mono mix of the RCA jack inputs
• A mono-mix of the 3.5 mm stereo jack inputs
• A combined mix of the RCA inputs and the stereo jack inputs
The mix selection can be set using
ControlSpace Designer
software.
The WP22BU-D has two output options. An XLR connector provides
a balanced line output for analog output 1 only, and a 3.5 mm stereo
jack connector provides an unbalanced line level output for both analog
output 1 and analog output 2. Both output connectors may be used
simultaneously.
Figure 2. WP22BU-D internal audio block diagram
Connection to the Dante network is provided by a single Ethernet
RJ-45 connector on the back of the unit. The WP22BU-D is PoE
powered over the network cable from a suitable PoE source (IEEE
802.3af) eliminating the need for a local power supply
ControlSpace Designer software is used to configure specific features
and the audio routing of this device.
IN 1
12
3
T x 1
A, B, A+B
Selected in ControlSpace
®
Designer
™
Software
T x 2R x 2
Dante
Network
R x 1
OUT 1
OUT 1/2
IN 2A
IN 2B
21
3
Loading ...
Loading ...
Loading ...