Safety instructions
Register online at www.philips.com/welcome today
to get the most benefits from your purchase.
Registering your model with Philips makes you eligible for all of the
valuable benefits listed below, so don’t miss out.
Register online at www.philips.com/welcome to ensure:
* Product safety notification
By registering your product, you’ll
receive notification - directly from the
manufacturer - in the rare case of a
product recall or safety defect.
* Additional benefits
Registering your product guarantees
that you’ll receive all of the privileges
to which you’re entitled, including
special money-saving offers.
Know these safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The caution marking is located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the apparatus’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
For fastest support visit us online for chat and self service
solutions at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry
are committed to making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and
old- must be supported on proper stands or installed according to the
manufacturer’s recommendations. Televisions that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests, carts,
etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe
installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the
furniture on which the television is placed.
• NEVER place the television on furniture that can easily be used as steps,
such as a chest of drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or
knocked down.
• ALWAYS route cords and cables connected to the television so that they
cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if you have
any doubts about your ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television
manufacturer and has a safety certification by an independent
laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount
manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the
television is appropriate. Some mounts are not designed to be mounted
to walls and ceilings with steel studs or cinder block construction. If you
are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a
wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
• Many new television buyers move their older CRT televisions into a
secondary room after the purchase of a flat-panel television. Special
care should be made in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and
appropriate for its size and weight.
• NEVER place your older CRT television on a dresser where children may
be tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the
edge of your furniture.
Important safety
instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart /
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building, as close to the point of cable
entry as practical.
Example of antenna grounding as per NEC - National Electric Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
GROUND CLAMPS
Notice
Trademarks are the property of Koninklijke Philips N.V. or their respective
owners. Funai Corporation reserves the right to change products at any
time without being obliged to adjust earlier supplies accordingly.
The material in document is believed adequate for the intended use of
the system. If the product or its individual modules or procedures are
used for purposes other than those specified herein, confirmation of their
validity and suitability must be obtained.
Funai Corporation warrants that the material itself does not infringe any
United States patents.
No further warranty is expressed or implied.
Funai Corporation cannot be held responsible neither for any errors in
the content of document nor for any problems as a result of the content
in document. Errors reported to Funai Corporation will be adapted and
published on the Funai Corporation support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999 % or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards) and
is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers to
the inside of the product. Repairs may only be done by service centers
and official repair shops. Failure to do so shall void any warranty, stated
or implied.
Any operation expressly prohibited in document, any adjustments or
assembly procedures not recommended or authorized in document shall
void the warranty.
Positioning the TV
• Large screen TVs are heavy. 2 people are required to
carry and handle a large screen TV.
• Make sure to hold the upper and bottom frames of the
unit firmly as illustrated.
• Install the unit in a horizontal and stable position.
• Do not install the unit in direct sunlight or in a place subject to dust or
strong vibration.
• Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
• When installing this unit in a temperate environment, avoid a place with
rapid temperature changes.
– Operating temperature: 41 °F (5 °C) to 104 °F (40 °C)
• This unit should not be used in a tropical environment as it has not been
evaluated under such conditions.
• No objects should be placed directly on or under this unit, especially
lighted candles or other flaming objects.
• Depending on your external devices, noise or disturbance of the picture
and / or sound may be generated if the unit is placed too close to them.
In this case, please ensure enough space between the external devices
and the unit.
• Do not insert the AC power cord into the power socket outlet before all
the connections are made.
• Ensure that you always have easy access to the AC power cord and
outlet to disconnect the TV from the AC outlet.
• Before you move the TV, disconnect attached cables to prevent damage
to connectors, especially the TV tuner.
• Be sure to unplug the AC power plug from the AC outlet before moving
or carrying the unit.
• When moving the TV and then setting it down, please be careful not to
pinch the AC power cord under the unit.
Regulatory notices
WARNING: To prevent injury, this apparatus must be securely attached to
the furniture / wall in accordance with the instructions.
Tipping, shaking or rocking the unit may cause injury / death.
WARNING: Never place a TV in an unstable location. A TV may fall, causing
serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
– Using cabinets or stands recommended by the manufacturer
of the TV.
– Only using furniture that can safely support the TV.
– Ensuring the TV is not overhanging the edge of the
supporting furniture.
– Not placing the TV on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the
TV to a suitable support.
– Not placing the TV on cloth or other materials that may be
located between the TV and supporting furniture.
– Educating the children about the dangers of climbing on
furniture to reach the TV or its controls.
If your existing TV is being retained and relocated, the same
considerations as above should be applied.
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it. A falling unit
can cause serious injury or even death. In order to avoid interruption of
ventilation, this unit should not be placed in built-in equipment such as a
book cabinet, rack, etc., and the vents of this unit should not be covered
with anything such as a tablecloth, curtain, newspaper, etc. Make sure
that there is enough ventilation space (4 ” / 10 cm or more) around this
unit.
Press to turn the unit on and go into standby mode. To completely
turn off the unit, you must unplug the AC power plug from the AC power
outlet. Disconnect the AC power plug to shut the unit off when trouble is
found or not in use. The AC plug shall remain readily available.
AC power plug
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
Environmental care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit - www.recycle.philips.com
End of life directives
Philips pays a lot of attention to produce environmental-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
#
Batteries usage
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) should not be
exposed to excessive heat such as sunshine, fire or the like.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,
ni-mh, Li-ion, etc.) batteries.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium, however in certain localities, disposing batteries with household
waste is not permitted. Please ensure you dispose of batteries according
to local regulations.
Preparing to move / ship the unit
Please pack the unit properly by following the
diagram on the carton.
• To avoid damage to the screen, do not pack the
stand on the same side as the TV screen, refer to
the illustration.
Federal communications commission notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio or television technician
for help.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1)This device may not cause harmful
interference, and (2)This device must accept interference received,
including interference that may cause undesired operation.
Declaration of conformity
Trade name: PHILIPS
Responsible party: Funai Corporation, Inc.
Model: 32PFL5505/F7
Address: 21061 S. Western Ave. Suite 210, Torrance, CA 90501,
USA
Telephone number : 1 866 309 5962
Modifications
This apparatus may generate or use radio frequency energy. Changes or
modifications to this apparatus may cause harmful interference.
Any modifications to the apparatus must be approved by Funai
Corporation.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
rules and regulations.
FCC statutory notice for wireless LAN adapter.
FCC caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
FCC RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines. This equipment should be installed and operated
keeping the radiator at least 20 cm or more away from your body.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down
through the MAC, through the digital and analog baseband, and finally to
the RF chip. Several special packets are initiated by the MAC. These are the
only ways the digital baseband portion will turn on the RF transmitter, which
it then turns off at the end of the packet. Therefore, the transmitter will be
on only while one of the aforementioned packets is being transmitted. In
other words, this device automatically discontinue transmission in case of
either absence of information to transmit or operational failure.
Downloading an electronic copy
To obtain a more detailed electronic copy of document:
1. Point your browser to : www.philips.com/support
2. Choose your country of location with language.
3. Enter the product name or number in the search field. Alternatively,
you can browse the catalog.
4. Click the description or model.
5. Under product support, click “User manual”.
Funai Corporation Inc. does not warrant access to the portal or to any
of the services, content, software and advertising. Funai Corporation
Inc. may, in its sole discretion, add or remove access to any specific
services, content, software and advertising at any time. Although Funai
Corporation Inc. will strive to provide a good selection of services, content
or software, Funai Corporation Inc. does not warrant continued access to
any specific services, and content or software.
Funai Corporation Inc. does not warrant Wireless Screencasting
compatibility with all source devices such as smartphones, tablets,
laptops, etc. due to large variability in hardware, firmware, drivers,
software and implementation of wireless casting applications on these
source devices. Although Funai Corporation Inc. will strive to enhance
compatibility and performance across a range of source devices, Funai
Corporation Inc. does not warrant compatibility with specific source
devices.
Wall mount
Wall mount bracket kit
Your product Brand Model # Screw dimension
32PFL5505/F7 SANUS AST16 M4 x 1.378 ” (35 mm)
• Your TV meets the VESA standard for wall mounting. Consult with your
local dealer for a wall mount bracket which is compatible with your TV
model.
• The recommended wall mount bracket kit (sold separately) allows the
mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to the wall
mount instruction book.
• Funai Corporation is not responsible for any damage to the product
or injury to yourself or others if you elect to install the TV wall mount
bracket or mount the TV onto the bracket on your own.
• The wall mount bracket must be installed by experts.
Funai Corporation is not liable for any accidents or injuries incurred while
installing this product, including but not limited to those noted below:
• Install the wall mount bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and wall mount bracket
may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their specified length.
If screws too long are used this may cause mechanical or electrical
damage inside the TV set. If screws too short are used this may cause
the TV set to fall.
• Do not fasten the screws by excessive force. This may damage the
product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a wall mounting
bracket.
• Do not mount the TV onto the wall mounting bracket while your TV is
plugged in or turned on. It may result in an electrical shock injury.
When installing the unit on the wall, allow this much space.
Top : 11.8 ” (30 cm)
Left and right side : 5.9 ” (15 cm)
Bottom : 3.9 ” (10 cm)
Copyright
All other registered and unregistered trademarks are
the property of their respective owners.
The terms HDMI and HDMI High-Definition Multimedia Interface,and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Funai
Electric Co., Ltd. is under license. Other trademarks and trade names
are those of their respective owners.
• Google, Google Play, Android, and related marks and logos are
trademarks of Google LLC.
• Use of this TV requires consent to Google Terms of Service and Privacy
Policy.
• This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• Features and specifications are subject to change without notice.
• Portions of this software are copyright © The FreeType Project (www.
freetype.org).
• Network services, content, and the operating systems and software
of this Product may be subject to individual terms and conditions and
changed, interrupted or discontinued at any time and may require fees,
registration and credit card information.
• The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
• Some features may require an always-on broadband internet
connection, firmware update and/or a minimum bandwidth. Internet
services vary by location.
Quick start guide
Televisions
5505 series
1-866-309-5962
http://tinyurl.com/y2e29xsq
9 AM to 9 PM EST
> Monday – Saturday
9 AM to 6 PM EST
> Sunday
Call us:
Chat with us:
Hours of operation:
Scan to call us:
Scan to chat with us:
1 What’s in the box
License
Funai Corporation, Inc. hereby offers to deliver, upon request,
a copy of the complete corresponding source code for the
copyrighted open source code packages, on an “AS IS” basis, used
in this product for which such offer is requested by the respective
licenses. This offer is valid up to three years after the product
purchase to anyone in receipt of this information. To obtain source
code, please contact Funai Corporation, Inc.
You should write to Funai Service Corporation OSS Request, 2425
Spiegel Drive, Groveport, OH 43125, USA.
Funai Corporation, Inc. disclaims any and all warranties and
representations with respect to such software and related source
code including quality, reliability, usability, and accuracy, and
further disclaim all express, implied, statutory or otherwise,
including without limitation, any implied warranties of title, non-
infringement, merchantability, or fitness for a particular purpose.
Funai Corporation, Inc. shall not be liable to make any corrections
to the open source software or source code or to provide any
support or assistance with respect to it. Funai Corporation, Inc.
disclaims any and all liability arising out of or in connection with
the use of this software and/or source code.
Limited warranty
Limited warranty one (1) year
Warranty coverage:
This warranty obligation is limited to the terms as set forth below.
Who is covered:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase (“Warranty
Period”) from an Authorized Dealer. The original sales receipt showing
the product name and the purchase date from an authorized retailer is
considered such proof.
What is covered:
This warranty covers new products if a defect in material or workmanship
occurs and a valid claim is received within the Warranty Period. At its option,
the company will either (1) repair the product at no charge, using new or
refurbished replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable
used parts and is at least functionally equivalent or most comparable to
the original product in current inventory, or (3) refund the original purchase
price of the product.
Replacement products or parts provided under this warranty are covered
against defects in materials and workmanship from the date of the
replacement or repair for ninety (90) days or for the remaining portion of
the original product’s warranty, whichever provides longer coverage for you.
When a product or part is exchanged, any replacement item becomes your
property and the replaced item becomes company property. When a refund
is given, your product becomes company property.
Note: Any product sold and identified as refurbished or renewed carries a
ninety (90) day Limited warranty.
Replacement product can only be sent if all warranty requirements are
met. Failure to follow all requirements can result in delay.
What is not covered - Exclusions and limitations:
This Limited warranty applies only to new company manufactured
products that can be identified by the trademark, trade name, or logo
affixed to it. This Limited warranty does not apply to any hardware
product or any software, even if packaged or sold with the product, as
manufacturers, suppliers, or publishers may provide a separate warranty
for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within the
product, or other additional product or part not covered by this warranty.
Recovery or reinstallation of programs, data or other information is not
covered under this Limited warranty.
This warranty does not apply (a) to damage caused by accident, abuse,
misuse, neglect, misapplication, or non-supplied product, (b) to damage
caused by service performed by anyone other than company approved
Authorized Service Location, (c) to a product or a part that has been
modified without written company permission, or (d) if any serial number
has been removed or defaced, or (e) product, accessories or consumables
sold “AS IS” without warranty of any kind by including refurbished product
sold “AS IS” by some retailers.
This Limited warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of antenna /
signal source systems outside of the product.
• Product repair and / or part replacement because of improper installation
or maintenance, connections to improper voltage supply, power line surge,
lightning damage, retained images or screen markings resulting from
viewing fixed stationary content for extended periods, product cosmetic
appearance items due to normal wear and tear, unauthorized repair or
other cause not within the control of the company.
• Damage or claims for products not being available for use, or for lost
data or lost software.
• Damage from mishandled shipments or transit accidents when returning
product.
• A product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was designed,
manufactured, approved and / or authorized, or repair of products
damaged by these modifications.
• A product used for commercial or institutional purposes (including but
not limited to rental purposes).
• Product lost in shipment and no signature verification receipt can be
provided.
• Failure to operate per document.
To obtain assistance…
Contact the customer care center at: 1 866 309 5962
Chat with us in English: https://tinyurl.com/y2e29xsq
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING
COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights
which vary from state / province to state / province.
Funai Service Corporation 2425 Spiegel Drive, Groveport, OH 43125, USA
Quick start guide
with provided screws
Product design and user interface are for illustrative purposes only.
Actual product and user interface may vary.
Loading ...
