Loading ...
Loading ...
Loading ...
Scrubbing with steel cleaning wires may harm the vitroceramic glass surface. Formations
of du st
on the surface shouldbe cleaned up using a dampened cloth.
Changes in colour which might occur on the ceramic glass surface do not affect the functional
structure
or permanence of the vitroceramic. The reason for the changes in colour is not the change
in th e
material; it may be because the burnt residues on the surface are not cleaned up or the pots used
have worn the glass surface or because unsuitable cleanin g materials were used.
The cleaning spatula should always be used prior tochemical cleaning substances. With this
sp atu l a,
you can clean up the tiniest of dirts on the vitroceramic surface. Dirt s that are difficult to remove,
such
as melted plastic, heavy oils, sweet substances, can be removed easily with the spatula. As the
spatula in clu des a r azo r, it i s dan gerous and must be kept out of reach of child ren
During cleaning with the spatula, pay attention not to scrape off the sillicon adhesives found on the sides
of the glass.
It is recommended that you leave this operation tothe Authorised Service.
Unplug the oven first and make sure that it is cold. After removing the lidinfront of the light, take the
bul b o u t. In ser t the n ew b ul b resi sta nt to 30 0
0
C, whichyou find atAuthorised Services, into the
place of the bulb you have removed. Then fit the light protecting back into its place. After that,
your
oven wi ll be read y fo r use.
20
ENG
5.5 MAINTENANCE
Replacing the Oven Light Bulb
lid
.
will
Loading ...
Loading ...