Loading ...
Loading ...
Loading ...
Fixing the vitroceramic hob:
Fixing the solid hotplate hob:
h>40mm
h
Figure C
Figure D
Figure E
h<40mm
h
ENG
In order to prevent leakage of any liquids on the counter, a special sealing putty is supplied
together with your oven. Apply this putty around the clearance on the kitchen counter. Extend
the five-piece putty by stretching and apply it around the clearance. Place the hob on it, as
indicated in the FigureA. Make sure to fit all four clamps by using one screw for exch as shown in
the Figure C. In case the thickness of the kitchen counter is less than 40mm, use the clamp
as shown in the Figure E. After fitting your hob into its place, neatly remove the
excess sealing putty around the sides with the help of a spatula Figure D.
·
·
·
Apply the one-sided self-adhesive sealing tape supplied all the way round the lower edg
Screw the 4 worktop mounting brackets on theside walls of product.
Place the hob into the opening on the worktop.
ε
of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it.
Installation steps:
1.Place the hob into the opening on worktop. The size of opening is given in Figure A.
Fordetails, see the headings either or
.
2.Connect the hob to the oven using the the plug given on the hob. The socket for plug is
placed on the rear panel of oven.
3.Connect the oven to the electrical supply.
4.Place the oven into its built-in niche. Either placement in Figure A or placement in Figure B
is applicable depending on the size of cabinet opening. For details, see the heading
.
Fixing the solid hotplate hob Fixing the vitroceramic
hob
Fixing
the oven
Loading ...
Loading ...
Loading ...