Loading ...
Loading ...
Loading ...
11
2. Place the blade cover down and make sure it clicks into
place with the tabs on the motor housing (Fig. 5).
3. Make sure the latches on each side of the blade cover
snap into place and that the blade is secured in the
product before beginning operation (Figs. 6 – 7).
4. To remove the blades, gently press the latches on both
sides and lift the blades up (Fig. 6).
NOTE: If you have any questions, please call the Snow Joe
®
+
Sun Joe
®
customer service department at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Operation
IMPORTANT! The product is intended for light-duty trimming
of shrubs for residential properties.
mWARNING! The blades continue to move for a few
seconds after the tool is switched OFF. Turn OFF the tool and
wait until the blades come to a complete stop before adjusting
or cleaning.
mCAUTION! Never touch the blade or blade rail while
the tool is in operation and be aware of the sharp edges even
when the hedge trimmer is not in use.
Starting + Stopping
1. Insert the battery fully in the battery compartment (Fig. 8).
Fig. 4
Blade cover tab
Fig. 5
Tabs
Slots
Fig. 6
Blade
Latch
Blade cover
Fig. 7
Fig. 8
Battery
compartment
Battery
Loading ...
Loading ...
Loading ...