Sun Joe 24V-SSEG-LTE-SJG-RM 24-Volt iON+ Cordless Handheld Shrubber + Trimmer Kit W/ 2.0-Ah Battery and Charger Certified Refurbished

User Manual - Page 10

For 24V-SSEG-LTE-SJG-RM.

PDF File Manual, 20 pages, Read Online | Download pdf file

24V-SSEG-LTE-SJG-RM photo
Loading ...
Loading ...
Loading ...
10
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, plug the
charger adapter into an appropriate AC power outlet.
Connect the charger plug into the charge socket of the
battery to start charging (Fig. 2).
3. The battery will take approximately 5 hours to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery
mWARNING! This charger does not automatically turn o
when the battery is fully charged. Please take care not to leave
the battery plugged into the charger. Switch o or unplug the
charger at the mains when charging is complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
mWARNING! Always remove battery pack from the tool
when you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal injury.
mWARNING! Do not use any attachments or accessories
not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can
result in serious personal injury.
mCAUTION! Wear protective gloves before handling the
blades.
mWARNING! Make sure the unit is powered o before
handling the blades.
Fitting the Blades
1. To t the blades, turn the unit upside down on a hard
surface, align the blade cover tab with the slot in the
motor housing and place it into position (Figs. 3 – 4)
Fig. 2
Battery
indicators
Fig. 3
Blade cover tab
Slot
Motor housing
Blades
Loading ...
Loading ...
Loading ...