Loading ...
Loading ...
Loading ...
34 35
• Coffee machine:
If the width of the recess is 560 mm: there is no need to place shims behind the
plate of the guides. (Fig. 5)
If the width of the recess is 562 mm place the 1 mm shims provided behind the
plates of the guides. (Fig. 4)
If the width of the recess is 564 mm place the 2 mm shims provided behind the
plates of the guides. (Fig.4)
Place the runners on the shelf of the unit whilst keeping them ush with the side
of the unit.
Fix the brackets with the runners to the unit using 2 screws in the slotted holes.
(Fig. 5)
Fig. 4
Fig. 5
INSTALLATION - Products in 45 cm high recesses
Make sure that it is aligned horizontally with the other products. If necessary,
place a shim* under one or both brackets. (Fig. 7)
Fasten it in place using all the screws only after the front of the machine has
been correctly aligned. (Fig.8)
Fig.6
Pull out the runners and place the coffee machine on them. (Fig. 6)
Loading ...
Loading ...