Loading ...
Loading ...
Loading ...
HOW TO CLEAN
ENGLISH
How to clean the soft steam cap
Do not touch the surface of the soft cap right after cooking. You can get burned.
Detach the soft steam
cap like the picture.
Press the hook in the back, and follow the arrow
to detach and clean. Make sure you clean frequently with
a sponge or a neutral detergent.
When fitting the rubber packing into the plate,
please make sure the packing is facing the correct
direction.
Assemble the went so
that it fits into the groove
perfectly.
After you attach the soft
steam cap to fit into the
groove, press A” part firmly
to assemble the soft steam
cap into the product.
Separate dew dish Separate the drain ditch
cap by pushing it down.
Clean the drain ditch cap
and dew dish with a
neutral detergent.
Clean the drain ditch cap
with brush kit
Securely put in the dew
dish after cleaning.
How to clean dew dish
Packing
-The valve hole of the pressure weight that allows steam to escape should be checked regularly to
ensure that it is not blocked.
If you use the valve hole of pressure weight as it is blocked, the hot steam or any hot content within the
cooker can cause injury.
Do not use the cleaning pin for any other use except to clean the valve hole of the pressure weight.
Soft steam cap
Cleaning Pin
If the valve hole of the pressure weight part is clogged, puncture it with the cleaning pin
How to
disassemble the
pressure weight
After the Lock/Unlock handle is locked(located in “Lock”) turn the pressure weight
counterclockwise while pulling it up, and pull it put
Punch the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
When the pressure weight is properly assembled, it can freely be turned.
Attached on the
botton of the unit.
Alien
Substance
Pressure Weight
www.cuckooworld.com
2. To close the lid turn the handle to unlock,
in shown in the picture on the right.
1. Check to make sure the inner pot is
place correctly inside the main body.
3. If there is excess steam inside the
inner pot it might be difficult to lock
the handle. Twist the pressure
weight and allow the excess steam
to release. Then try to turn the
handle again.
Do not try to close the lid by force. It can cause problems.
When lid does not close perfectly
Loading ...
Loading ...
Loading ...