Loading ...
Loading ...
Loading ...
digital display. The cycle time can be increased or decreased using
the up and down arrow keypads. The time and temperature selec-
tion may be adjusted manually at any time before or during the cy-
cle.
Selections
The following selections can be used to modify the currently chosen
cycle. The default selections will be lit after choosing a cycle.
Temp
Press the Temp keypad to change a Manual cycle’s temperature.
Choose from No Heat, Low or High.
Dryness
Press the Dryness keypad to change the dryness level in an Auto-
Sensing cycle. Choose from Damp, Near Dry or Dry.
Damp Leaves load slightly damp for
easier ironing.
Near Dry Use for normal loads.
Dry Use for heavy items such as
blue jeans and blankets.
Over-drying can cause wrinkling, shrinking, excessive lint conditions,
and will use more energy than necessary. To increase energy savings
and to make sure loads are dried without over-drying, set your Au-
to-Sensing loads on Near Dry. If items are damp or over-dry at the
end of a cycle, increase or decrease the Dryness seing the next
time these loads are dried. Remember the seings that work best
to get ideal drying results.
Moisture Level
The Moisture Level status lights will be lit during an Auto-Sensing
cycle. The Sensing light will be lit at the beginning of the cycle.
The Wet and Dry lights will be lit based on readings from the mois-
ture sensing system.
Options
The following options can be used to modify the currently chosen
cycle.
Signal (on select models only)
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four seings: Off, Low, Medium, High.
Status
The Status lights are lit during the cycle to show what part of the
cycle is running.
Door Open
The Door Open status light is lit
any time that the dryer door is
open.
Heating The Heating status light is lit
to indicate that a heat portion
of the cycle is currently operat-
ing.
Cooling The Cooling status light is lit
during the cool-down portion of
the cycle.
NOTE: The Heating or Cooling status light flashes (1
second on/1 second off) during the warm-up period. The
status light stays lit until the motor starts running.
To Dry Clothes
IMPORTANT: Refer to the INSTALLATION INSTRUC-
TIONS before using dryer.
IMPORTANT: Before using dryer for the first time, use an
all-purpose cleaner or a detergent and water solution
and a damp cloth to remove shipping dust from inside of
dryer drum.
1. Sort items into separate loads.
NOTE: Remove all objects from pockets such as
lighters and matches.
TLW1991N_SVG
NOTE: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.
2. Clean lint filter.
Operating Your Dryer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
11 Part No. D514472ENR4
Loading ...
Loading ...
Loading ...