Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
16
EN
LP TANK RESTRAINT
Be sure to restrain the LP cylinder by securing it with the retention bolt on the slide-out tray as
shown below. It is important the tank does not fall over or stretch the hose which could cause a
gas leak.
REMOVAL OF SLIDE-OUT TANK TRAY
Should you wish to remove the slide-out tank tray because you are not using a portable LP
tank, pull out the tray to its fully extended position, exposing 6 mounting screws. Use a Philips
screwdriver to remove these screws and remove the mounting brackets.
LEAK TESTING
GENERAL
Although all gas connections on your Hestan grill are leak tested at the factory prior to
shipment, a complete gas tightness check must be performed at the installation site due to
possible movement in shipment, or excessive pressure unknowingly being applied to parts of the
unit. Periodically check the whole system for leaks, or immediately check if the smell of gas is
detected. Please read the Hestan Grill manual for complete instructions on proper leak testing of
your grill before using.
2-STAGE
LP REGULATOR /
HOSE ASSY.
TANK
RETENTION
BOLT
SLIDE-OUT
TANK TRAY
20 LB.
LP TANK
(SUPPLIED BY
CUSTOMER)
GAS CONNECTIONS
Loading ...
Loading ...
Loading ...