Loading ...
Loading ...
Loading ...
o
Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
Use a subwoofer.
No: Select when a subwoofer is not connected.
When “Speaker Config.”-“Subwoofer” in the menu is set to “None”, No is
automatically set. (v p. 217) If the “Front” setting is “Small”, the setting is
automatically “Yes”.
o
SW Mode
Select low range signals to be reproduced by subwoofer.
LFE
(Default):
When “2ch Playback”-“Front” is set to “Large”, only
LFE signals are output from the subwoofer. Also,
when “2ch Playback” - “Front” is set to “Small”, the
front channel low range signals are added to the
LFE signals and output from the subwoofer.
LFE+Main:
The front channel low range signal is added to the
LFE signal output from the subwoofer.
This can be set when “2ch Playback”-“Subwoofer” is set to “Yes”.
o
Crossover
Set the maximum frequency of the bass signal output from each
channel to the subwoofer.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 80 Hz)
0
This can be set when “2ch Playback”-“Subwoofer” is set to “Yes”.
0
When “2ch Playback”-“Front” is set to “Large” and “SW Mode” is set to LFE,
“Full Band” is displayed and this cannot be set.
o
Distance FL/Distance FR
Set distance from main listening position to speaker.
0.0ft – 60.0ft (Default : 12.0ft) /
0.00m – 18.00m (Default : 3.60m)
Set the difference in the distance between the speakers to less than 20.0 ft (6.00
m).
o
Level FL/Level FR
Adjust the level of each channel.
-12.0dB – +12.0dB (Default : 0.0dB)
Contents Connections Playback Settings Tips Appendix
226
Front panel Display Rear panel Remote Index
Loading ...
Loading ...
Loading ...