Loading ...
Loading ...
Loading ...
11
Installation – Remote Blower Preparation
3. Install threaded cable lock and remote blower
wiring harness through the remote blower
wiring knockout. Attach by (4) M4*8 screws.
5. Connect 6 pin male connector from remote
blower wiring to 6 pin female connector on
control board box.
REMOTE BLOWER PREPARATION
1. Remove internal blower fl ange plate.
2. Install remote blower 8” round collar. Attach by
(4) M4*8 screws.
NOTE: For instructions on mounting the remote
blower please refer to the CBE-1000 or PBN-
1000A remote blower manual included in the
remote blower packaging or on our website at
www.zephyronline.com
4. Secure ground wire from remote blower wiring
to ground wire rivet nut.
Loading ...
Loading ...
Loading ...