Loading ...
Loading ...
Loading ...
11
TAB 5, 13TAB 4, 12 TAB 6, 14 TAB 8, 16TAB 7, 15English TAB 3, 11TAB 2, 10
OPERATION
System status lights
The status lights on the Bose
®
wireless computer
speaker front panel indicate source selection.
Using the USB key
The USB key will automatically connect your computer
with the wireless speaker when you insert it into a USB
port. The wireless speaker must be powered on and
selected as the audio output device in order to connect.
Note: If the USB key does not automatically connect, see
“Restoring the wireless link” on page 20.
Note: If the power light is on but there is no audio, see “If you
don’t hear music from the wireless speaker:” on page 8.
AUX
AUDIO IN source (page 13)
Off: ................AUX source not selected
On: ................AUX source is selected
Wireless source
Off: ................... No wireless connection
Fast Flashing: .. Wireless source is
connecting
Slow Pulse: ....... Speaker or USB key is
in discoverable mode
On: ................... Wireless source is
connected
Brief Flash: ....... Wireless source is
(every 3 sec) selected, but discon-
nected at the computer
Note: Each button pressed on
the remote causes the light for the
selected source to blink.
Disconnect-reconnect button
Press to disconnect or reconnect
the wireless speaker
Power light
Off: ...................... USB key is not powered
Slow flashing: ..... Powered and available for
connecting to the wireless
speaker
Fast flashing: ....... Establishing a connection
On: ....................... Connected to the wireless
speaker
Trinity_OG.book Page 11 Tuesday, May 17, 2011 11:56 AM
Loading ...
Loading ...
Loading ...