Loading ...
Loading ...
C1 cold wash key
By pressing this button it is possible to transform every programme into a cold washing one, without
modify other characteristics (water level, times, rythmes, etc..).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed
thanks to this new device.
C2 aquaplus (sensitive key)
Thanks to the new SENSOR ACTIVA SYSTEM, by pressing the key it is possible to run a special
washing cycle applicable to all programs and types of fabric, caring for their fibres and the delicate skin of
the users who use them.
Taking on much more water, together with the new combined action of drum rotation cycles and taking on
and discharging water allow you to obtain perfectly clean, rinsed clothes. More water is used in the wash
to dissolve the detergent completely, ensuring an effective washing action. The water in the rinses has
also been increased to eliminate all trace of detergent in the fibres.
This function has been specifically studied for people with delicate, sensitive skin, who can suffer irritation
or allergy from the slightest detergent residue.
It is also advisable to use this function for children's clothes and delicate fabrics in general, especially for
washing bathrobes, whose fibres tend to retain detergent.
This option is not available for the wool program.
5- Select spin speed if required (B1)
B1 spin speed
Once the programme has been selected, the maximum spin speed allowed for that programme appears
on the display. Pressing the spin button will reduce the speed by 100 rpm each time the button is
pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin
button repeatedly.
6.-To start the programme, once options have been chosen, press the key H. The washing machine will
begin to operate. If you wish to cancel the option you have selected, press the key again. (The pilot light
will go off).
B2 delay start button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour
delay (h01 appears on the display); the pre-set delay increases by 1 hour each time the button is
pressed, until h24 appears on the display, at which point pressing the button again will reset the delay
start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown
will begin and when it has finished the programme will start automatically.
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme
selected.
At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE”
button or to cancel the process by setting the selector to the OFF position and then selecting another
programme.
cycle duration (V)
When a programme is selected the display automatically shows the cycle duration, which can vary,
depending on the options selected.
Once the programme has started you will be kept informed constantly of the time remaining to the end of
the wash.
door light (G)
Once the START/PAUSE button has been pressed the light first flashes then stops flashing and remains
on until the end of the wash.
2 minutes after the end of the wash the light goes off to show that the door can now be opened.
Loading ...