Loading ...
Loading ...
Loading ...
9
ENGLISH
(Original instructions)
Using the pull out crevice tool (Fig. B,C)
u Extend the crevice tool (3) as shown in gure C, until
it clicks in place. The push in brush (4) can be tted if
required for dusting and upholstery cleaning.
u To retract the crevice tool (3) press the crevice tool release
button (3a) allowing it to return to its normal position
(Fig. B).
Fitting the handle to the main chassis
(Fig. D, E)
u Slide the handle (6) into the main chassis (8) as shown in
gure D.
u Secure with retaining screw (17) as shown in gure E.
Fitting the Dustbuster
®
to the Chassis
(Fig. F, G, H)
u Slide the Dustbuster
®
, nozzle rst, into the chassis (8)
until an audible ‘click’ is heard as shown in gure F.
u To release the Dustbuster
®
from the chassis press the
chassis release button (8a) and lift clear.
u The appliance can now be operated via the on/off button
(5) on the handle (6) along with the ‘BOOST’ mode as
shown in gure H. This also allows you to utilise the beater
bars via the ‘brush on’ control (5A).
Removing and clearing the beater bars
(Fig. I, J)
u To remove the beater bar unit (9) from the oor head (10)
Depress the release button (11) as shown in gure I.
u The beater bar (12) can now be removed. The end pieces
are also removable allowing you to clear the brushes from
any hair or other debris that may have accumulated (Fig.
J).
Charging (Fig. K, L)
u Place the appliance into the charging base (7) as shown in
gure K .
u Plug the charging port (7) into an electrical outlet.
u Switch the electrical outlet on. The LED charging indicator
(B) will Illuminate (Fig. L).
Multi LED Display
A. Filter sensor
Whenever a lter is Blocked and needs cleaning, the red
lter LED (A) in the handle will illuminate.
Clean ne dust from lter (See section on ‘cleaning lters’
in this manual).
B. LED Charging display
Battery icon (B) will illuminate when appliance requires
charging. Led display indicates state of charge (See LED
pattern chart in this manual).
C. BOOST mode
Illuminates when the appliance is in BOOST mode
allowing you to operate at higher power.
LED Patterns
Charging
Battery Fault
Charger Fault
Battery Hot
A
B
C
Loading ...
Loading ...
Loading ...