Loading ...
Loading ...
Loading ...
HOSE”.
After a short while the display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
➔ Connect the hose to the spout (g. 7) and the other end to the drip tray (g. 10).
➔ Press the rotary control.
The display shows “CLEANING FROTHER, DO NOT REMOVE HOSE”.
Once the cleaning cycle is nished, the appliance starts heating up and is again ready for use.is
complete.
➔ Empty the drip tray and used coffee container (g. 1/N and 1/O) and re-insert them cleaned.
The display shows the main menu.
5.4. System cleaning
Note: If the appliance needs cleaning, the display will show “PLEASE CLEAN SYSTEM”. You can continue
making coffee, but we recommend starting the cleaning program as soon as possible. Otherwise the func-
tion might be impaired and your warranty could be compromised.
Attention: Do not disrupt the cleaning process. Insert cleaning tab only if the appliance asks for it.
➔ Turn the rotary control to “MAINTENANCE” and press it.
➔ Turn the rotary control to “CLEAN SYSTEM” and press it.
The display shows “EMPTY TRAYS” and “FILL WATER” alternatingly.
➔ Remove drip tray and used coffee container (g. 1/N and 1/O) and empty both.
➔ If necessary rell the water tank with fresh water. Reinsert the water tank rst, followed by drip
tray and used coffee container.
The appliance rinses twice and the display shows “CLEANING SYSTEM”.
The display shows “CLEANING TAB IN GROUND COFFEE CHUTE”.
➔ Place a sufciently large bowl (minimum contents 0.5 l) under the spout (g. 1/E).
➔ Open the lid on the right hand side of the appliance (g. 1/G).
➔ Open the lid of coffee powder chute (g. 1/M).
➔ Place a cleaning tab in the chute and close both lids.
The display shows “START CLEANING”.
➔ Press the rotary control to conrm.
The appliance starts the cleaning process. The display shows “CLEANING SYSTEM”. The fully auto-
mated process takes approximately 10 minutes.
Note: Should a message appear during the cleaning process, follow the indicated steps. The appliance
will continue with the cleaning automatically afterwards.
Once the process is nished, the display shows “EMPTY TRAYS“
➔ Remove drip tray with used coffee container (g. 1/N and 1/O), empty both and reinsert them.
➔ If necessary rell the water tank with fresh water. Reinsert the water tank rst, followed by drip
tray and used coffee container.
The appliance rinses, reheats and is ready for use after that. The display shows the main menu.
5.5. Descaling
If the appliance needs descaling, the display shows “PLEASE DESCALE SYSTEM”.
You can also start the descaling programme any time manually.
Attention: Please make sure to follow each step exactly as outlined below! You can continue making
coffee, but we recommend starting the descaling program as soon as possible. Otherwise the function
might be impaired and your warranty could be compromised.
Attention: Do not disrupt the descaling program. Never use vinegar or vinegar-based agents, only
standard liquid products specically recommended for automatic coffee machines.
Attention: Before starting the descaling program remove the lter from the water tank.
➔ Turn the rotary control to “MAINTENANCE” and press it.
➔ Turn the rotary control to “DESCALING SYSTEM” and press to conrm.
The display shows “EMPTY TRAYS”.
➔ Remove drip tray with used coffee container (g. 1/N and 1/O), and empty both.
➔ Reinsert drip tray and used coffee container.
The display shows “REMOVE WATER TANK”.
➔ Remove the water tank
The display shows “FILL WATER TANK TO 0,5l MARK” and “INSERT DESCALER TO TANK” alternat-
ingly.
➔ Remove the lter. Fill the water tank to the 0,5 l mark with fresh water and reinsert it.
Attention: Always add the water rst to the 0,5 l mark and then the descaling agent. Never vice versa!
Please follow the manufacturer’s advice how to use the descaler.
➔ Only now add the descaler.
The display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
➔ Connect one end of the hose to the spout (g. 7).
➔ Connect the other end to the drip tray (g. 10).
➔ Press the rotary control.
The display shows “START DESCALING”.
➔ Place a sufciently large bowl (minimum contents 0.5 l) under the spout (g. 1/E).
➔ Press the rotary control.
The descaling process starts. The display shows “SYSTEM DESCALING”. The descaling process is
automatic and takes approximately 30 minutes. The descaling solution is transported through the
system in intervals.
Once the cycle is completed, the display shows “EMPTY TRAYS”.
➔ Remove drip tray with used coffee container (g. 1/N and 1/O) and empty both.
➔ Reinsert drip tray and used coffee container.
➔ Remove water tank and rinse it with fresh water.
➔ Reinsert lter in the water tank if required.
➔ Fill the water tank with fresh water and reinsert it.
The display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
➔ Connect the hose with one end to the spout (g. 7).
➔ Connect the other end to the drip tray (g. 10).
➔ Place a sufciently large bowl (about 0.5 l) under the spout.
➔ Press the rotary control.
The display shows “PLEASE RINSE”.
➔ Press the rotary control to start rinsing process.
The display shows “SYSTEM RINSING, DO NOT REMOVE HOSE”. The automatic cleaning process
is started that lasts for approximately two minutes. Once the cycle is nished, the display shows
“EMPTY TRAYS”.
➔ Empty drip tray and used coffee container (g. 1/N and 1/O) and reinsert both.
The appliance reheats and is ready for use. The display shows the main menu.
84 85
5. Cleaning and maintenances 5. Cleaning and maintenance
Loading ...
Loading ...
Loading ...