Loading ...
Loading ...
Loading ...
Special requirements when preparing two cups:
➔ To brew two cups one directly after the other press the rotary control twice in quick succession to
start the process.
When brewing two cups at the same time, the grinder will automatically do two rounds. In case there
is not enough water, the bean container runs empty or the trays need emptying during the two grind-
ing cycles, the respective symbols will show on the display. In that case the second cup will not be
brewed.
➔ Follow the display and press the rotary control only once for the second cup.
4.1. Preparing individual drinks each time
Regardless of the standard setting in the menu item “SETTINGS”, “DRINKS RECIPES” each brewing
process can be customised.
➔ Turn the rotary control in the main menu to your preferred drink option (e.g. “LATTE MACCHIA-
TO”).
➔ Press button > (g. 1/C) until the blinking bean symbol indicates that you can change the aroma.
➔ While the symbol is blinking, turn the rotary control onto the requested setting.
Do you want to change other parameters like the quantity or the number of cups?
➔ Press button > (g. 1/C) until the requested setting appears.
➔ Während das Symbol blinkt, drehen Sie den Rotary auf Ihre gewünschte Einstellung.
➔ The new settings are stored when you press the exit button or if you do not carry out any further
changes.
Note: Be mindful if you brew one or two cups and place the cups accordingly under the spout (g. 5 and 6).
➔ Start the brewing process by pressing the rotary control.
Note: Should you have initiated the brewing process incidentally or too early, it is possible to change a
few parameters while making the coffee. A blinking display will show you which.
➔ With the symbol blinking, turn the rotary control onto the required setting.
After the bean symbol for the aroma, the blinking display now shows the ml-indicator for the capacity.
You can alter those any given time.
➔ If you want to stop the process, simply press the exit button (g. 1/D).
4.2. Adjusting standard settings for drinks without milk
(ESPRESSO, COFFEE, CAFFÈ AMERICANO)
The standard ex-factory setting is
• for espresso: strength standard, quantity 40 ml, aroma prole 3, the display shows “ooo 40ml
III”
• for coffee: strength standard, quantity 120 ml, aroma prole 1, the display shows “ooo 120ml I”
• for Caffè Americano: Strength standard, quantity 180 ml, aroma prole 2, the display shows “ooo
120ml II”.
➔ Place a cup underneath the spout (g. 5).
➔ Turn the rotary control to the drink of your choice (e.g. Espresso). Press the rotary control.
The cup light switches on. The appliance prepares a cup of your chosen drink in the standard setting.
Brewing two cups
➔ To brew two cups one directly after the other, press the rotary control twice in quick succession to
start the process.
The standard setting can be altered in two different ways:
4.2.1. Live programming
You can change and save the standard setting during the brewing process as follows.
➔ Turn the rotary control in the main menu to “SETTINGS” and press it.
➔ Turn the rotary control to “DRINK RECIPES” and press it.
➔ Turn the rotary control to the drink of your choice (e.g. “ESPRESSO”) and press it.
➔ Turn the rotary control to “LIVE PROGRAMMING”.
➔ To change the standard setting press the rotary control.
The display shows “SELECT STRENGTH”.
➔ Turn the rotary to select the strength of your choice (left for weaker, right for increased strength).
➔ Press the rotary to conrm your selected strength.
The display shows “SELECT AROMA”
➔ Turn the rotary to select the aroma prole of your choice (see 3.4. for details).
➔ Press the rotary to conrm your selected aroma.
The display shows “PLEASE WAIT”. The appliance grinds, heats up and then starts the preparation.
The display shows “STOP COFFEE?”
➔ Press the rotary control when the required amount of coffee is reached.
The standard setting for the drink of your choice (e.g. Espresso) has now been altered and saved. The
display shows “RECIPE SAVED” for a short time and will then switch back to the main menu with the
new standard settings.
4.2.2. Manual programming
You can also change and save the standard settings manually.
➔ Turn the rotary control to “SETTINGS” and press it.
➔ Turn the rotary control to “DRINK RECIPES” and press it.
➔ Turn the rotary control to the drink of your choice (e.g. “ESPRESSO”) and press it.
Select strength
➔ Turn the rotary to select “STRENGTH” and press.
➔ Turn the rotary to select the strength of your choice (left for weaker, right for stronger).
Press the rotary to conrm the setting.
Select aroma
➔ Turn the rotary to “AROMA” and press.
➔ Turn the rotary to select the aroma prole of your choice (see 3.4. for details). Press the rotary to
conrm your selected aroma.Press the rotary to conrm your selected aroma.
Select preparation method (cappuccino)
➔ Turn the rotary to “PREPARATION” and press.
➔ Turn the rotary to the preparation method of your choice.
In the MILK COFFEE setting milk froth is prepared rst, and then the coffee. The setting COFFEE
MILK prepares coffee rst.
Tip: Try the different preparations methods to nd your personal favourite.
➔ Press the rotary to conrm your setting.
Select quantity
➔ Turn the rotary control to “COFFEE QUANTITY” and press it.
➔ Turn the rotary control to select the quantity of your choice (from 20ml to 240ml) and press it.
Note: Make sure that your cups t.
76 77
4. Preparing coffee varieties 4. Preparing coffee varieties
Loading ...
Loading ...
Loading ...