Loading ...
Loading ...
Loading ...
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for
any length of time during this process, it must
be allowed to remain upright for 6 hours before
plugging it in to avoid damage to the internal
components.
1. Remove the two screws securing the
worktop.
2. Remove the worktop and the thermostat
dial. The worktop may be diffi cult to
remove because of the thermostat dial. Push
forward slightly to release the dial and
remove the worktop.
3. Remove the upper hinge from the top right
side of the cabinet. Remove the door from
the cabinet.
4. Remove the adjustable feet from the cabinet.
Remove the lower hinge from the lower
right side of the cabinet.
5. Unscrew and remove the hinge pin.
6. Flip the lower hinge over and reinstall the
hinge pin on the other side.
7. Install the lower hinge on the lower left side
of the cabinet. Install both adjustable feet.
8. Install the door onto the cabinet. Install the
upper hinge. Before tightening the screws
on the upper hinge, ensure that the top of
the door is level with the top of the cabinet
and that the rubber gasket is making a
good seal with the cabinet all the way
around.
9. Install the worktop and replace the two
screws.
10. Ensure the thermostat dial is in the correct
position.
OPERATING INSTRUCTIONS
5
1
2
3
4
5
6
7
8
9
10
Loading ...
Loading ...
Loading ...