Loading ...
Loading ...
Loading ...
Check these solutions if your dryer...
Troubleshooting
Problem
Solution
The unit has a
special odor.
- Household odors from painting, varnishing, strong cleaners, etc.
may enter the dryer with surrounding room air. This is normal as
the dryer draws the air from the room, heats it, pulls it through the
tumbler, and exhausts it outside.
- When these odors linger in the air, ventilate the room completely
before using the dryer.
Odors remain in
clothing after
refresh
- Fabrics containing strong odors should be washed in a normal
cycle.
Garments still
wrinkled after
Wrinkle-prevent
- Small loads of 1 to 4 items work best.
- Load fewer garments. Load similar-type garments.
Lint on clothes
- Make sure the lint filter is cleaned before every load. With some
loads that produce high amounts of lint, it is necessary to clean the
filter after the cycle.
- Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are
lint trappers (for example, a pair of lack linen pants).
- Divide larger loads into smaller loads for drying.
- check pockets thoroughly before washing and drying clothes.
25
26
SolutionsError Code Possible Cause
The PCBs failed. Call the service center for help.
The humidity sensor failed. The unit will complete the current operating
cycle.
The unit can still operate under the Time
Cycles.
Call the service center for help.
The temperature sensor failed. Call the service center for help.
Error Codes
Fabric Care Chart
Appendix
The following symbols provide garment care direction. The Clothing care labels include
symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The
use of symbols ensures consistency among garment manufacturers of domestic and
imported items. Follow care label directions to maximize garment life and reduce
laundering problems.
Wash Cycle Special Instructions
Normal Line Dry/ Hang to Dry
Permanent Press /
Wrinkle Resistant /
Wrinkle Control
Drip Dry
Gentle/Delicates Dry Flat
Hand Wash Heat Setting
Water Temperature**
High
Hot Medium
Warm Low
Cold Any Heat
Bleach
No Heat/Air
Any Bleach (when
needed)
Iron-Dry or Steam
Temperatures
Only Non-Chlorine
(color-safe)
Bleach (when needed)
High
Tumble Dry Cycle Medium
Normal Low
Permanent Press/
Wrinkle Resistant/
Wrinkle Control
Gentle/ Delicates
Warning Symbols for
laundering
Do Not Wash
Do Not Wring
Do Not Bleach
Do Not Tumble Dry
No Steam (added
to iron)
Do Not Iron
Dryclean
Dry Clean
Do Not Dry Clean
Line Dry/ Hang to
Drip Dry
Dry Flat
For machine-washable
wool. Loads should be
under 8 pounds.
Dry
** The number of dots represent appropriate wash water temperatures for various items.
The temperature range for Hot is 105°-125°F/41°-52°C, for Warm 85°-105°F/29°-41°C and
for Cold 60°-85°F/16°-29°C.
Loading ...