Loading ...
Loading ...
Loading ...
6
ninjakitchen.com
7ninjakitchen.com
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
35 Keep hands and utensils out of
containers while chopping to reduce the
risk of severe personal injury or damage
to the blender/food chopper. A scraper
may be used ONLY when the blender or
processor is not running.
36 If you find unmixed ingredients sticking
to the sides of the cup, stop the
appliance, remove the blade assembly,
and use a scraper to dislodge ingredients.
37 DO NOT open the pitcher’s pour spout
cap while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the container
or lid from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lids and containers.
40 If the appliance overheats, a thermal switch
will activate and temporarily disable
the motor. To reset, unplug the appliance
and allow it to cool for approximately
15 minutes before using again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
42 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from the
container. Failure to remove the blade
assembly before emptying the container
results in a risk of laceration.
43 If using the pitcher’s pour spout, hold the
cover in place on the container or ensure
lid lock is engaged when pouring to
avoid risk of injury.
44 Remove the Hybrid Edge™ Blades
Assembly from the single-serve cup or
XL bowl upon completion of blending.
DO NOT store ingredients before or
after blending them in the cup or bowl
with the blade assembly attached. Some
foods may contain active ingredients or
release gases that will expand if left in a
sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid or Storage Lid to
cover.
45 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
46 DO NOT attempt to sharpen blades.
47 Turn o the appliance and unplug the
motor base before cleaning.
48 Never feed food by hand. Always use
food pusher.
WARNING
SAVE THESE INSTRUCTIONS
NOTE: When using the pitcher and
stacked blade assembly, DO NOT
process more than 600g of raw meat,
600g of Parmesan (hard) cheese, or
700g of baking chocolate.
Loading ...
Loading ...
Loading ...