Loading ...
Loading ...
Loading ...
17ninjakitchen.com
16
ninjakitchen.com
USING THE POWER BLENDER & PROCESSOR PITCHER
WITH FLAT LID & DOUGH BLADE ASSEMBLY
8 Remove the lid and dough blade
assembly before removing contents. To
remove the lid, press the release button
above the handle, and rotate the lid tab
counterclockwise out of the lock position,
then lift the entire lid up.
9 Turn the unit o by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
6a If using an Auto-iQ® program, use the dial
to select DOUGH, then press START/STOP.
The preset feature will automatically stop
at the end of the program. To stop the unit
at any time, press START/STOP.
6b For Manual mode, press IQ/MANUAL.
Use the dial to select speed 1, then press
START/STOP. Once the ingredients have
reached your desired consistency, press
START/STOP, and wait for the unit to
come to a complete stop.
7 Remove the pitcher from the motor base
by turning it counterclockwise and then
lifting up.
IMPORTANT:
Only use speed 1 when
using the dough blade assembly.
1 Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
2 Lower the pitcher onto the motor base.
The handle should be aligned slightly
to the right and the pitcher should be
oriented so the LOCK symbols are visible
on the motor base. Rotate the pitcher
clockwise until it clicks into place.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: DO NOT add ingredients before
completing installation of the dough
blade assembly.
NOTE:
If the dough blade assembly is
not fully seated, you will not be able to
install and lock the lid.
NOTE:
The pitcher lid handle will not fold
down unless it is attached to the pitcher.
3 Exercising care, grasp the dough blade
assembly by the top of the shaft and
place it onto the drive gear inside the
pitcher. Note that the blade assembly
will fit loosely onto the drive gear.
4 Add ingredients to the pitcher. DO NOT
add ingredients past the DOUGH MAX or
COOKIE MAX line on the pitcher.
5 Place the flat lid on the pitcher. Press down
on the handle until it clicks into place.
Once the lid is locked in place, press the
Power button to turn unit on. The available
program buttons will illuminate and the unit
will be ready for use.
IMPORTANT:
As a safety feature, when
the unit is powered on, if the pitcher and
lid are not properly installed, the timer
will display “- -” and the motor will be
disabled. If this happens, repeat step 5.
When the pitcher and lid are properly
installed, and the unit is powered on,
the available programs will illuminate,
indicating the appliance is ready to use.
Loading ...
Loading ...
Loading ...