Loading ...
Loading ...
Loading ...
7
2. Secure the safety guard onto the trimmer head with the
partial thread screw provided (Fig. 6).
Operation
Securing the Extension Cord
1. To prevent the grass trimmer appliance cord and extension
cord from disconnecting during use, tie the extension cord
into a loose knot around the lower bar of the handle as
shown (Fig. 7).
2. Connect the extension cord to the appliance cord.
mWARNING! Remove stones, loose pieces of wood, and
other objects from the cutting area. The trimmer line continues
to rotate for a few seconds after switching o the trimmer. Let
the motor come to a complete stop before resuming operation.
Do not rapidly switch the trimmer o and on.
mCAUTION! Always wear eye protection.
Starting + Stopping
1. To switch on the trimmer, press and hold the trigger
switch. Release the trigger to stop (Fig. 8).
Trimming
• Hold the grass trimmer with your right hand on the handle,
rest your arm on the support bracket and your left hand on
the trimmer pole. The grass trimmer should be held at a
comfortable position with the handle about hip height.
• Wear non-slip gloves for maximum grip and protection.
• For the best cutting action against walls, fences, and in high
grass, move the grass trimmer slowly so grass is cut with
the tip of the high speed nylon line.
• Avoid dragging the grass trimmer and string spool cover in
contact with the ground.
• Trim only when grass and weeds are dry.
NOTE: As the weather becomes cooler, the tendency for the
nylon line to break becomes greater. DO NOT USE WHEN
TEMPERATURE IS BELOW 50ºF (10ºC).
• Cut tall grass from top down. This will prevent grass from
wrapping around the shaft housing and string head which
may cause damage from overheating.
• If grass becomes wrapped around the string head:
– Stop the trimmer.
– Unplug the trimmer.
– Remove the grass.
Trimmer
head
Safety Guard
Fig. 5
Trimmer
head
Partial thread screw
Fig. 6
Appliance
Cord
Extension
Cord
Fig. 7
ON/OFF
Trigger
Switch
Fig. 8
Loading ...
Loading ...
Loading ...